[cisco-voip] Swapping an FXO card for a T1 card in a Cisco Router 2600

[Paul]

According to this URL regarding 2600s...

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a0080094e92.shtml


I see nothing in terms of VIC or VWIC slots. It sounds like you'll need an NM that supports VICs to be able to use that FXO card and furthermore have enough DSP resources to bring the card up.




________________________________
From: Go0se <me at go0se.com>
To: "Miller, Steve" <MillerS at DicksteinShapiro.COM>; Cisco VOIP <cisco-voip at puck.nether.net>
Sent: Tuesday, May 12, 2009 2:21:17 PM
Subject: Re: [cisco-voip] Swapping an FXO card for a T1 card in a Cisco Router 2600


a)      Does your IOS support voice cards?
b)      Do you have DSPs?
c)       Is it a generation 2 wic in a generation 1 router?
 
d)      Do some people call you the “space cowboy”? 
e)      Do some people call you the “gangster of love”?
 
-Go0se
 
From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On
Behalf Of Miller, Steve
Sent: Tuesday, May 12, 2009 1:05 PM
To: Cisco VOIP
Subject: [cisco-voip] Swapping an FXO card for a T1 card in a Cisco
Router 2600
 
Is
there anything special I need to do in order to install an FXO card into a slot
where there is currently a T1 card?  I shut down the router (a test
router), removed the T1 card and installed the FXO, but the system doesn't seem
to recognize it.  Do I need to reprogram something?  I am a total
novice at routers.  Any help would be great.  Thanks.
 
Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com
 
--------------------------------------------------------
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s)
named above. This communication may contain material protected by attorney-client, work product, or other 
privileges. If you are not the intended recipient or person responsible for delivering this confidential
communication to the intended recipient, you have received this communication in error, and any review, use, 
dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files 
is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, 
received, or sent on its network.  If you have received this confidential communication in error, please notify the 
sender immediately by reply e-mail message and permanently delete the original message. 
 
To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com
 
Dickstein Shapiro LLP
http://www.DicksteinShapiro..com
 
==============================================================================