[cisco-voip] Sip Source Port on CUBE

Mark Holloway mh at markholloway.com
Tue May 12 17:35:03 EDT 2009


I read through the Cisco IOS SIP Configuration Guide and could not find any
supporting documentation that states connection-reuse binds UDP to source
port 5060 for outgoing communication.  AFAIK, whatever port is first used by
the router, that port number will "stick" until the sip-ua is reset.  Have
you tested this?  


On 5/12/09 10:43 AM, "Nick Matthews" <matthnick at gmail.com> wrote:

> A hidden command for you today:
> 
> sip-ua
>   connection-reuse
> 
> 
> 
> -nick
> 
> On Tue, May 12, 2009 at 9:52 AM, Baris Gulten <barisgulten at gmail.com> wrote:
>> I think like this.
>> 
>> 
>> 
>> voice service voip
>> 
>>  address-hiding
>> 
>>  allow-connections h323 to h323
>> 
>>  allow-connections h323 to sip
>> 
>>  allow-connections sip to h323
>> 
>>  allow-connections sip to sip
>> 
>>  supplementary-service h450.12
>> 
>>  h323
>> 
>>  sip
>> 
>>   bind control source-interface Loopback0
>> 
>>   bind media source-interface Loopback0
>> 
>>   registrar server expires max 3600 min 3600
>> 
>> !
>> 
>> interface Loopback0
>> 
>>  ip address xx.xx.xx.xx 255.255.255.252 (real ip)
>> 
>> !
>> 
>> 
>> 
>> Or you can use fast 0/0 instead loopback 0
>> 
>> 
>> 
>> From: cisco-voip-bounces at puck.nether.net
>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ian MacKinnon
>> Sent: Tuesday, May 12, 2009 1:27 PM
>> To: cisco-voip at puck.nether.net
>> Subject: [cisco-voip] Sip Source Port on CUBE
>> 
>> 
>> 
>> Hi All,
>> 
>> 
>> 
>> Is there any way of binding the source port to 5060 for outgoing SIP calls
>> in CUBE?
>> 
>> 
>> 
>> I have tried
>> 
>> voice service voip
>> 
>>  sip
>> 
>>   min-se 600
>> 
>>   localhost dns:hostname.net:5060
>> 
>> 
>> 
>> Thanks
>> 
>> 
>> 
>> 
>> 
>> ________________________________
>> 
>> --
>> 
>> This email and any files transmitted with it are confidential and intended
>> solely for the use of the individual or entity to whom they are addressed.
>> If you have received this email in error please notify the sender. Any
>> offers or quotation of service are subject to formal specification.
>> Errors and omissions excepted. Please note that any views or opinions
>> presented in this email are solely those of the author and do not
>> necessarily represent those of Lumison and nPlusOne.
>> Finally, the recipient should check this email and any attachments for the
>> presence of viruses. Lumison and nPlusOne accept no liability for any
>> damage caused by any virus transmitted by this email.
>> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>> 
>> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip




More information about the cisco-voip mailing list