[cisco-voip] Sip Source Port on CUBE

[Nick Matthews]

That's because it's hidden :)

I haven't directly tested it but I've had customers say it works.


-nick

On Tue, May 12, 2009 at 5:35 PM, Mark Holloway <mh at markholloway.com> wrote:
> I read through the Cisco IOS SIP Configuration Guide and could not find any
> supporting documentation that states connection-reuse binds UDP to source
> port 5060 for outgoing communication.  AFAIK, whatever port is first used by
> the router, that port number will "stick" until the sip-ua is reset.  Have
> you tested this?
>
>
> On 5/12/09 10:43 AM, "Nick Matthews" <matthnick at gmail.com> wrote:
>
>> A hidden command for you today:
>>
>> sip-ua
>>   connection-reuse
>>
>>
>>
>> -nick
>>
>> On Tue, May 12, 2009 at 9:52 AM, Baris Gulten <barisgulten at gmail.com> wrote:
>>> I think like this.
>>>
>>>
>>>
>>> voice service voip
>>>
>>>  address-hiding
>>>
>>>  allow-connections h323 to h323
>>>
>>>  allow-connections h323 to sip
>>>
>>>  allow-connections sip to h323
>>>
>>>  allow-connections sip to sip
>>>
>>>  supplementary-service h450.12
>>>
>>>  h323
>>>
>>>  sip
>>>
>>>   bind control source-interface Loopback0
>>>
>>>   bind media source-interface Loopback0
>>>
>>>   registrar server expires max 3600 min 3600
>>>
>>> !
>>>
>>> interface Loopback0
>>>
>>>  ip address xx.xx.xx.xx 255.255.255.252 (real ip)
>>>
>>> !
>>>
>>>
>>>
>>> Or you can use fast 0/0 instead loopback 0
>>>
>>>
>>>
>>> From: cisco-voip-bounces at puck.nether.net
>>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ian MacKinnon
>>> Sent: Tuesday, May 12, 2009 1:27 PM
>>> To: cisco-voip at puck.nether.net
>>> Subject: [cisco-voip] Sip Source Port on CUBE
>>>
>>>
>>>
>>> Hi All,
>>>
>>>
>>>
>>> Is there any way of binding the source port to 5060 for outgoing SIP calls
>>> in CUBE?
>>>
>>>
>>>
>>> I have tried
>>>
>>> voice service voip
>>>
>>>  sip
>>>
>>>   min-se 600
>>>
>>>   localhost dns:hostname.net:5060
>>>
>>>
>>>
>>> Thanks
>>>
>>>
>>>
>>>
>>>
>>> ________________________________
>>>
>>> --
>>>
>>> This email and any files transmitted with it are confidential and intended
>>> solely for the use of the individual or entity to whom they are addressed.
>>> If you have received this email in error please notify the sender. Any
>>> offers or quotation of service are subject to formal specification.
>>> Errors and omissions excepted. Please note that any views or opinions
>>> presented in this email are solely those of the author and do not
>>> necessarily represent those of Lumison and nPlusOne.
>>> Finally, the recipient should check this email and any attachments for the
>>> presence of viruses. Lumison and nPlusOne accept no liability for any
>>> damage caused by any virus transmitted by this email.
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>