[cisco-voip] LMR config
Moataz Mamdouh
moataz_mmdh at yahoo.com
Sat May 16 07:04:51 EDT 2009
Hello
you can check IPICS documents on CISCO.COM . it will guide you to the LMR Gateway Configuration .
--- On Thu, 5/14/09, Paul <asobihoudai at yahoo.com> wrote:
From: Paul <asobihoudai at yahoo.com>
Subject: Re: [cisco-voip] LMR config
To: "Leslie Meade" <lmeade at signal.ca>, "cisco voip" <cisco-voip at puck.nether.net>
Date: Thursday, May 14, 2009, 12:36 PM
this apparently is an LMR configuration
Cisco 3845 Router
3845-gw#show running-config
Building configuration...
Current configuration : 17622 bytes
!
!---Last configuration change at 23:07:46 PDT Wed Jul 7 2004 by cisco
!
version 12.3
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service internal
!
hostname 3845-gw
!
boot-start-marker
boot-end-marker
!
logging buffered 4096 informational
enable secret 5 $1$3do1$SDp9TOK4YaZ7XguJYD2MD1
!
!---Local Database of username and passwords for Web server and local
!---authentication
!
username cisco password 7 1511021F0725
!
clock timezone PST -8
clock summer-time PDT recurring
no network-clock-participate slot 1
no network-clock-participate slot 2
no network-clock-participate slot 3
no network-clock-participate slot 4
no network-clock-participate wic 0
no network-clock-participate wic 1
network-clock-participate wic 2
no network-clock-participate wic 3
no network-clock-participate aim 0
no network-clock-participate aim 1
aaa new-model
!
!
aaa group server tacacs+ admin
server 192.x or 10.x
server 192.x or 10.x
!
aaa group server radius vpn
server 192.x or 10.x auth-port 1645 acct-port 1646
!
!---AAA configuration used for local authentication
!
aaa authentication login admin group tacacs+ enable
aaa authentication login remote group vpn
aaa authentication login NOTACACS line
aaa authentication login LOCAL local
aaa authentication login WEB none
aaa authentication ppp LOCAL local
aaa authentication dot1x default group vpn
aaa authorization console
aaa authorization exec default local
aaa authorization network groupauthor local
aaa session-id common
ip subnet-zero
no ip source-route
!
ip cef
!
!
!---Configure a DHCP address pool for each IP phone:
ip dhcp excluded-address 192.168.10.1 192.168.10.99
!
ip dhcp pool NONAT
network 10.1.153.0 255.255.255.248
default-router 10.1.153.1
dns-server 10.1.162.183 10.1.156.120
option 150 ip 10.1.152.9
domain-name cisco.com
!
ip dhcp pool NAT
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 10.1.162.183 1010.1.156.120
option 150 ip 10.1.152.9
domain-name cisco.com
!
ip domain name cisco.com
ip name-server 10.1.162.183
ip name-server 10.1.156.120
ip multicast-routing
ip sap cache-timeout 30
ip ssh time-out 30
ip ssh version 1
ip ids po max-events 100
no ip rcmd domain-lookup
ip rcmd rcp-enable
ip rcmd rsh-enable
!
voice-card 0
no dspfarm
!
!
!
!---Configuration to enable "H.323 to H.323" and "H.323 to SIP" calls between Cisco
!---CallManager-Cisco CME-Cisco Unity Express. The "allow connections h323 to h323" &
!---"allow-connections h323 to sip" enable an easy configuration on gateway without the
!---need for loopback-dn for incoming calls from Cisco CallManager or for call flow from
!---Cisco CallManager to SIP for Voice Mail.
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12 advertise-only
h323
!
!
!
!---Configuration to support LMR(Land Mobile Radio) integration through E&M port on the
!---router (similar to Hoot and Holler configuration)
!
voice class permanent 1
signal timing oos restart 50000
signal timing oos timeout disabled
signal keepalive disabled
signal sequence oos no-action
!
!
!---Two T1 ports connected back-to-back to bridge VoIP to multicast audio bridging. This
!---is required to enable dialing into multicast. Connecting the TDM T1 port back-to-back
!---offers the possibility of using E.164 number as a conference ID, or for using the
!---multicast stream for application such as Hoot and Holler.
!---
!---Cisco CME offers 3-party conference calling and is the recommended method for a
!---small branch office, the following T1 loopback cable is not required for configuring
!---the conferencing features.
!---
!---Cisco IOS supports audio mixing of loudest three streams. The TDM back to
!---back connection enables the bridging of 23 channels of VoIP to one or
!---more multicast connections (one side with multicast configuration and the
!---other side with VoIP configuration)
!---This method provides a way to connect the standards-based VoIP call control to
!---the multicast audio streams that do not have any associated call control.
!
controller T1 0/2/0
framing esf
linecode b8zs
ds0-group 1 timeslots 1 type e&m-immediate-start
ds0-group 2 timeslots 2 type e&m-immediate-start
ds0-group 3 timeslots 3 type e&m-immediate-start
ds0-group 4 timeslots 4 type e&m-immediate-start
ds0-group 5 timeslots 5 type e&m-immediate-start
ds0-group 6 timeslots 6 type e&m-immediate-start
!
controller T1 0/2/1
framing esf
clock source internal
linecode b8zs
ds0-group 1 timeslots 1 type e&m-immediate-start
ds0-group 2 timeslots 2 type e&m-immediate-start
ds0-group 3 timeslots 3 type e&m-immediate-start
ds0-group 4 timeslots 4 type e&m-immediate-start
ds0-group 5 timeslots 5 type e&m-immediate-start
ds0-group 6 timeslots 6 type e&m-immediate-start
!
no crypto isakmp enable
!
!
!---Loopback0 used to bind H323 to the Loopback0 interface. RTP Packets
!---originate/terminate on the router using this IP address.
!
interface Loopback0
ip address 10.1.152.9 255.255.255.255
h323-gateway voip interface
h323-gateway voip bind srcaddr 10.1.152.9
!
interface Loopback2
ip address 10.1.152.241 255.255.255.252
ip ospf network point-to-point
!
interface Loopback3
ip address 10.1.152.249 255.255.255.252
ip virtual-reassembly
ip ospf network point-to-point
!
!---Configuration to enable Hoot and Holler using multicast on router. The multicast
!---streaming of packets from the local router uses the VIF interface to derive the local
!---ip address and the port of the packets. This can be verified by the show command "show
!---voip rtp connection"
!
interface Vif1
ip address 10.1.153.41 255.255.255.252
ip pim sparse-dense-mode
!
!
!---WAN uplink
!
interface Serial0/0/0
ip address 10.1.152.30 255.255.255.252
ip pim sparse-dense-mode
ip nat outside
ip virtual-reassembly
no fair-queue
!
!--- Content Engine connected as a Network Module.
!
interface Content-Engine1/0
ip unnumbered Loopback3
ip pim sparse-dense-mode
service-module ip address 10.1.152.250 255.255.255.252
service-module ip default-gateway 10.1.152.249
!
!
interface FastEthernet3/0
switchport access vlan 110
switchport trunk native vlan 100
switchport mode trunk
switchport voice vlan 110
no ip address
!
interface FastEthernet3/1
switchport access vlan 100
switchport trunk native vlan 100
switchport mode trunk
switchport voice vlan 110
no ip address
!
interface FastEthernet3/2
switchport access vlan 100
switchport trunk native vlan 100
switchport mode trunk
switchport voice vlan 110
no ip address
!
interface FastEthernet3/3
switchport access vlan 100
switchport trunk native vlan 100
switchport mode trunk
switchport voice vlan 110
no ip address
!
!
!---Cisco Unity Express used for local voice-mail storage
!
interface Service-Engine4/0
ip unnumbered Loopback2
service-module ip address 10.1.152.242 255.255.255.252
service-module ip default-gateway 10.1.152.241
!
!--- Data VLAN, used for the desktops at the branch
!
interface Vlan100
ip address 192.168.10.1 255.255.255.0
ip pim sparse-dense-mode
ip nat inside
ip virtual-reassembly
!
interface Vlan110
ip address 10.1.153.1 255.255.255.248
ip pim sparse-dense-mode
ip virtual-reassembly
!
!---OSPF used as the routing protocol for scenario
!
router ospf 1
router-id 10.1.152.9
log-adjacency-changes
network 10.1.152.9 0.0.0.0 area 0
network 10.1.152.10 0.0.0.0 area 0
network 10.1.152.28 0.0.0.3 area 0
network 10.1.152.140 0.0.0.3 area 0
network 10.1.152.240 0.0.0.3 area 0
network 10.1.152.248 0.0.0.3 area 0
network 10.1.153.0 0.0.0.3 area 0
!
!---Static routes defined for routing to Service-Engine and Content-Engine network Module
ip classless
ip route 10.1.152.242 255.255.255.255 Service-Engine4/0
ip route 10.1.152.250 255.255.255.255 Content-Engine1/0
!
ip http server
ip http authentication aaa login-authentication LOCAL
no ip http secure-server
ip http path flash:
!
!---PAT (Port address translation used for the Data VLAN.
ip nat inside source list 11 interface Serial0/0/0 overload
!
!
access-list 11 permit 192.168.11.0 0.0.0.255
access-list 11 permit 192.168.20.0 0.0.0.255
access-list 11 permit 192.168.10.0 0.0.0.255
!
!
!---Router serves as TFTP server for Signed Image for 7960 phone on Local LAN.
!
tftp-server flash:P00306000300.bin
tftp-server flash:P00306000300.loads
tftp-server flash:P00306000300.sb2
!
control-plane
!
!
!---VoIP side of the Back-to-Back T1 used for bridging VoIP to multicast streams defined
!---by the dial-peer with " session protocol multicast"
!
voice-port 0/2/0:1
auto-cut-through
!
voice-port 0/2/0:2
auto-cut-through
!
voice-port 0/2/0:3
auto-cut-through
!
voice-port 0/2/0:4
auto-cut-through
!
voice-port 0/2/0:3
auto-cut-through
!
voice-port 0/2/0:4
auto-cut-through
!
voice-port 0/2/0:5
auto-cut-through
!
voice-port 0/2/0:6
auto-cut-through
!
!---E&M ports connected to the LMR (Land Mobile Radio). Each radio may have a different
!---radio frequency (such as VHF or UHF)
!
voice-port 0/1/0
auto-cut-through
voice-class permanent 1
operation 4-wire
signal lmr
lmr e-lead voice
timeouts call-disconnect 3
connection trunk 20480
!
voice-port 0/1/1
auto-cut-through
voice-class permanent 1
operation 4-wire
signal lmr
lmr m-lead audio-gate-in
lmr e-lead voice
timeouts call-disconnect 3
connection trunk 20481
!
!---Multicast side of the back-to-back T1 used for bridging VoIP to multicast connection
!---trunk points to the dial-peer that is used for streaming into multicast
!
voice-port 0/2/1:1
auto-cut-through
timeouts call-disconnect 3
connection trunk 20480
!
voice-port 0/2/1:2
auto-cut-through
timeouts call-disconnect 3
connection trunk 20481
!
!---Multicast side of the back-to-back T1 used for bridging VoIP to multicast connection
!---trunk points to the dial-peer that is used for streaming into multicast for local
!---conferencing. 2111 dialed from the network side is looped back to the other side of
!---the T1 that is connected to the multicast dial-peer to convert it into a multicast
!---stream. The 3-party mixing algorithm takes care of conferencing between the dialed
!---parties
!
voice-port 0/2/1:3
auto-cut-through
timeouts call-disconnect 3
connection trunk 21111
!
voice-port 0/2/1:4
auto-cut-through
timeouts call-disconnect 3
connection trunk 21111
!
voice-port 0/2/1:5
auto-cut-through
timeouts call-disconnect 3
connection trunk 21111
!
voice-port 0/2/1:6
auto-cut-through
timeouts call-disconnect 3
connection trunk 21111
voice-port 0/3/0
!
voice-port 0/3/1
!
voice-port 0/3/2
!
!---FXS ports tied to multicast Hoot and Holler
!
voice-port 0/3/3
!
!---Dial peers pointing toward the NM-CUE for auto attendant and voice mail
!
dial-peer voice 27749 voip
description Towards CUE-Auto-Attendant
destination-pattern 27749
session protocol sipv2
session target ipv4:10.1.152.242
dtmf-relay sip-notify
codec g711ulaw
no vad
!
dial-peer voice 27748 voip
description Towards CUE-Voice-Mail
destination-pattern 27748
session protocol sipv2
session target ipv4:10.1.152.242
dtmf-relay sip-notify
codec g711ulaw
no vad
!
!---Dial peers for dialing out; pointing to Cisco CallManager Release 3.3(3)
!
dial-peer voice 101 voip
description CCM-IT-Cisco
destination-pattern .T
session target ipv4:10.1.148.178
dtmf-relay h245-alphanumeric
codec g711ulaw
!
dial-peer voice 9 voip
preference 1
destination-pattern 91..........
session target ipv4:10.1.148.178
!
dial-peer voice 2 voip
destination-pattern 2....
session target ipv4:10.1.148.178
!
!---Dial Peers for multicast streaming from TDM port
!
dial-peer voice 20480 voip
description VoIP to multicast bridging for LMR integration
destination-pattern 20480
voice-class permanent 1
session protocol multicast
session target ipv4:239.192.17.191:20480
codec g711ulaw
vad aggressive
!
dial-peer voice 20481 voip
description VoIP to multicast bridging for LMR integration
destination-pattern 20481
voice-class permanent 1
session protocol multicast
session target ipv4:239.192.17.192:20480
codec g711ulaw
vad aggressive
!
dial-peer voice 21111 voip
description VoIP to multicast bridging for Local Conferencing
destination-pattern 21111
voice-class permanent 1
session protocol multicast
session target ipv4:239.192.17.195:20480
dtmf-relay cisco-rtp
codec g711ulaw
vad aggressive
!---Dial Peers for the T1 physical loopback used for bridging multicast to VoIP
!---(VoIP Side)
!
dial-peer voice 1 pots
description VoIP to multicast bridging for LMR
destination-pattern 27737
port 0/2/0:1
!
dial-peer voice 3 pots
description VoIP to multicast bridging for LMR
destination-pattern 4089027737
port 0/2/0:1
!
dial-peer voice 4 pots
description VoIP to multicast bridging for LMR
destination-pattern 27738
port 0/2/0:2
!
dial-peer voice 5 pots
description VoIP to multicast bridging for LMR
destination-pattern 4089027738
port 0/2/0:2
!
dial-peer voice 6 pots
description VoIP to local multicast conference bridge
destination-pattern 2111
port 0/2/0:3
!
dial-peer voice 7 pots
description VoIP to local multicast conference bridge
destination-pattern 2111
port 0/2/0:4
!
dial-peer voice 8 pots
description VoIP to local multicast conference bridge
destination-pattern 2111
port 0/2/0:5
!
dial-peer voice 9 pots
description VoIP to local multicast conference bridge
destination-pattern 2111
port 0/2/0:6
!
!
!---Dial Cisco CME Configuration with services configuration
!
!
telephony-service
fxo hook-flash
load 7910 P00403020214
load 7960-7940 P00306000300
max-ephones 27
max-dn 40
ip source-address 10.1.152.9 port 2000
auto assign 1 to 27
timeouts interdigit 5
system message Next GEN Branch Documentation
url services http://phone-xml.berbee.com/menu.xml
create cnf-files version-stamp 7960 Jun 24 2004 14:00:45
dialplan-pattern 1 408902.... extension-length 5
voicemail 27749
mwi relay
mwi expires 99999
max-conferences 8
call-forward pattern .....
web admin customer name cisco password admin
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern .....
secondary-dialtone 9
!
!
ephone-dn 1 dual-line
number 27725
description Ross
name Ross
call-forward busy 27749
call-forward noan 27749 timeout 10
!
!
ephone-dn 2 dual-line
number 27726
description Rachel
name Rachel
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 3 dual-line
number 27727
description Chandler
name Chandler
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 4 dual-line
number 27728
description Monica
name Monica
call-forward busy 27749
call-forward noan 27749 timeout 10
!
!
ephone-dn 5 dual-line
number 27729
description Jen-Shue Shih
name Jen-Shue Shih
call-forward busy 27749
call-forward noan 27749 timeout 10
!
!
ephone-dn 6 dual-line
number 27730
description Mike
name Mike
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 7 dual-line
number 27731
description Phoebe
name Phoebe
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 8 dual-line
number 27732
description Cosmo
name Cosmo
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 9 dual-line
number 27733
description Jerry
name Jerry
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 10 dual-line
number 27734
description George
name George
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 11 dual-line
number 27735
description Frank
name Frank
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 12 dual-line
number 27736
description Estelle
name Estelle
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 13 dual-line
!
!
ephone-dn 14 dual-line
!
!
ephone-dn 15 dual-line
number 27739
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 16 dual-line
number 27740
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 17 dual-line
number 27741
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 18 dual-line
number 27742
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 19 dual-line
number 27743
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 20 dual-line
number 27744
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 21 dual-line
number 27745
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 25
!
!
ephone-dn 27
number 27749
call-forward busy 27749
call-forward noan 27749 timeout 18
!
!
ephone-dn 39
number 8000.....
mwi off
!
!
ephone-dn 40
number 8001.....
mwi on
!
!
ephone 1
mac-address 0003.4713.5554
type CIPC
button 1:1
!
!
!
ephone 2
mac-address 0002.8A3E.6606
type CIPC
button 1:2
!
!
!
ephone 3
mac-address 0001.022C.88A1
type CIPC
button 1:3
!
!
!
ephone 4
mac-address 0009.6B10.494D
type CIPC
button 1:4
!
!
!
ephone 5
mac-address 0002.8A4B.000B
type CIPC
button 1:5
!
!
!
ephone 6
mac-address 0009.6B53.44C6
type CIPC
button 1:6
!
!
!
ephone 7
mac-address 0009.6B30.E399
type CIPC
button 1:7
!
!
!
ephone 8
mac-address 000B.BE37.1AB1
type 7960
button 1:8
!
!
!
ephone 9
mac-address 0006.D74B.15B3
type 7960
button 1:9
!
!
!
ephone 10
mac-address 000B.5F92.5784
type 7960
button 1:10
!
!
!
ephone 11
mac-address 000C.CE3A.87FA
type 7960
button 1:11
!
!
!
ephone 12
mac-address 000C.CE35.1B23
type 7960
button 1:12
!
!
!
ephone 13
mac-address 0002.8A9B.0CE5
type CIPC
button 1:13
!
!
!
ephone 14
mac-address 0003.47D8.C236
type CIPC
button 1:14
!
!
!
ephone 15
mac-address 000C.CE35.1935
type 7960
button 1:15
!
!
!
ephone 16
mac-address 0030.94C3.BE45
type 7960
button 1:16
!
!
!
ephone 17
!
!
!
ephone 18
!
!
!
ephone 19
!
!
!
ephone 20
!
!
!
ephone 21
!
!
!
line con 0
authorization exec LOCAL
stopbits 1
line aux 0
stopbits 1
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output all
line 130
no activation-character
no exec
transport preferred none
transport input all
transport output all
line 258
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
exec-timeout 0 0
password 7 04490E020D205E4107
line vty 5 8
exec-timeout 0 0
password 7 03165E0F040E334340
!
scheduler allocate 20000 1000
ntp clock-period 1079741
ntp master
ntp update-calendar
ntp server 10.68.10.80
ntp server 10.68.10.150
end
________________________________
From: Leslie Meade <lmeade at signal.ca>
To: cisco voip <cisco-voip at puck.nether.net>
Sent: Thursday, May 14, 2009 11:30:34 AM
Subject: [cisco-voip] LMR config
Has anyone got a config that they can share, that will show me
how to set up a VHF radio and a H323 gateway?
I had a go at it once but failed miserably.
Leslie
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090516/d3e391dd/attachment.html>
More information about the cisco-voip
mailing list