[cisco-voip] Best Test for New PRIs?

[Wes Sisk]

if you have DID's assigned to the T1 already you could:

use the 3825 in h.323 mode.  create dial-peers for the inbound calls  
that change the called party number and send them right back out the  
same T1, essentially hairpinning on the 3825.  Each call will then  
consume 2 ds0's, one inbound and one outbound.  This will allow you  
check voice quality, verify functionality of the DSP's on the 3825,  
check audio levels, etc.

debug isdn q931 will show calls coming in/going out.  'show voice call  
summary' will show summary of active calls.

/Wes

On May 19, 2009, at 3:58 PM, Miller, Steve wrote:

We will install a couple PRIs in a new office soon. We will be moving/ 
installing an existing CUCM 7.X system which currently exists at  
another location (production), but it will already be move weekend  
when the new equipment arrives and I want to be sure that the PRIs are  
working and that the PRIs have been properly programmed for CUCM.

Does anyone have details or testing plan for testing the PRIs before  
the CUCM is installed?

Is there any way to actually make calls with a 3825 router by hooking  
other equipment to it?

Is there a test set which would somehow emulate the system and allow  
us to dial out and also receive calls on the circuit?

Any ideas would be greatly appreciated!

Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com



--------------------------------------------------------
This e-mail message and any attached files are confidential and are  
intended solely for the use of the addressee(s)
named above. This communication may contain material protected by  
attorney-client, work product, or other
privileges. If you are not the intended recipient or person  
responsible for delivering this confidential
communication to the intended recipient, you have received this  
communication in error, and any review, use,
dissemination, forwarding, printing, copying, or other distribution of  
this e-mail message and any attached files
is strictly prohibited. Dickstein Shapiro reserves the right to  
monitor any communication that is created,
received, or sent on its network.  If you have received this  
confidential communication in error, please notify the
sender immediately by reply e-mail message and permanently delete the  
original message.

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com

= 
= 
= 
= 
= 
= 
========================================================================

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090519/a6f9508c/attachment.html>