[cisco-voip] Best Test for New PRIs?

[Paul]

sh isdn status
debug isdn q931
csim start

csim start won't do anything unless you have dial-peers



________________________________
From: "Miller, Steve" <MillerS at DicksteinShapiro.COM>
To: cisco-voip at puck.nether.net
Sent: Tuesday, May 19, 2009 3:58:56 PM
Subject: [cisco-voip] Best Test for New PRIs?


We will install a 
couple PRIs in a new office soon. We will be moving/installing an existing CUCM 
7.X system which currently exists at another location (production), but it will 
already be move weekend when the new equipment arrives and I want to be sure 
that the PRIs are working and that the PRIs have been properly programmed for 
CUCM.
 
Does anyone have 
details or testing plan for testing the PRIs before the CUCM is 
installed?    
 
Is there any way to 
actually make calls with a 3825 router by hooking other equipment to it?  
 
Is there a test set 
which would somehow emulate the system and allow us to dial out and also 
receive calls on the circuit?  
 
Any ideas would be 
greatly appreciated!
 
Steve Miller
Telecom Engineer
Dickstein 
Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| 
Fax (202) 330-5607
MillerS at dicksteinshapiro.com
 
--------------------------------------------------------
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s)
named above. This communication may contain material protected by attorney-client, work product, or other 
privileges.. If you are not the intended recipient or person responsible for delivering this confidential
communication to the intended recipient, you have received this communication in error, and any review, use, 
dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files 
is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, 
received, or sent on its network.  If you have received this confidential communication in error, please notify the 
sender immediately by reply e-mail message and permanently delete the original message. 

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com

==============================================================================



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090519/c90eeed7/attachment.html>