[cisco-voip] Best Test for New PRIs?

[ccieid1ot]

Make yourself a T1 loopback plug if you don't have 2 VWIC cards.

Wires for Crossover T1, 1-4 2-5.

On Tue, May 19, 2009 at 2:58 PM, Miller, Steve
<MillerS at dicksteinshapiro.com> wrote:
> We will install a couple PRIs in a new office soon. We will be
> moving/installing an existing CUCM 7.X system which currently exists at
> another location (production), but it will already be move weekend when the
> new equipment arrives and I want to be sure that the PRIs are working and
> that the PRIs have been properly programmed for CUCM.
>
> Does anyone have details or testing plan for testing the PRIs before the
> CUCM is installed?
>
> Is there any way to actually make calls with a 3825 router by hooking other
> equipment to it?
>
> Is there a test set which would somehow emulate the system and allow us to
> dial out and also receive calls on the circuit?
>
> Any ideas would be greatly appreciated!
>
>
> Steve Miller
> Telecom Engineer
> Dickstein Shapiro LLP
> 1825 Eye Street NW | Washington, DC 20006
> Tel (202) 420-3370| Fax (202) 330-5607
> MillerS at dicksteinshapiro.com
>
>
>
> --------------------------------------------------------
> This e-mail message and any attached files are confidential and are intended
> solely for the use of the addressee(s)
> named above. This communication may contain material protected by
> attorney-client, work product, or other
> privileges. If you are not the intended recipient or person responsible for
> delivering this confidential
> communication to the intended recipient, you have received this
> communication in error, and any review, use,
> dissemination, forwarding, printing, copying, or other distribution of this
> e-mail message and any attached files
> is strictly prohibited. Dickstein Shapiro reserves the right to monitor any
> communication that is created,
> received, or sent on its network.  If you have received this confidential
> communication in error, please notify the
> sender immediately by reply e-mail message and permanently delete the
> original message.
> To reply to our email administrator directly, send an email to
> postmaster at dicksteinshapiro.com
> Dickstein Shapiro LLP
> http://www.DicksteinShapiro.com
> ==============================================================================
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>