[cisco-voip] Best Test for New PRIs?

[Erick Bergquist]

Does this gateway have network connectivity to the existing call
manager?  You could set it up in the CUCM before moving the servers
and test calls in/out that way. Set up the gateway and a test
partition, route patterns, CSSs and assign the test CSS to 1 or 2
phones.

If not, do like others have suggested previously in the discussion. If
you have a FXS port on the gateway you could test with a POTS phone
off the FXS port and dial peers.

On Tue, May 19, 2009 at 9:55 PM, ccieid1ot <ccieid1ot at gmail.com> wrote:
> Make yourself a T1 loopback plug if you don't have 2 VWIC cards.
>
> Wires for Crossover T1, 1-4 2-5.
>
> On Tue, May 19, 2009 at 2:58 PM, Miller, Steve
> <MillerS at dicksteinshapiro.com> wrote:
>> We will install a couple PRIs in a new office soon. We will be
>> moving/installing an existing CUCM 7.X system which currently exists at
>> another location (production), but it will already be move weekend when the
>> new equipment arrives and I want to be sure that the PRIs are working and
>> that the PRIs have been properly programmed for CUCM.
>>
>> Does anyone have details or testing plan for testing the PRIs before the
>> CUCM is installed?
>>
>> Is there any way to actually make calls with a 3825 router by hooking other
>> equipment to it?
>>
>> Is there a test set which would somehow emulate the system and allow us to
>> dial out and also receive calls on the circuit?
>>
>> Any ideas would be greatly appreciated!
>>
>>
>> Steve Miller
>> Telecom Engineer
>> Dickstein Shapiro LLP
>> 1825 Eye Street NW | Washington, DC 20006
>> Tel (202) 420-3370| Fax (202) 330-5607
>> MillerS at dicksteinshapiro.com
>>
>>
>>
>> --------------------------------------------------------
>> This e-mail message and any attached files are confidential and are intended
>> solely for the use of the addressee(s)
>> named above. This communication may contain material protected by
>> attorney-client, work product, or other
>> privileges. If you are not the intended recipient or person responsible for
>> delivering this confidential
>> communication to the intended recipient, you have received this
>> communication in error, and any review, use,
>> dissemination, forwarding, printing, copying, or other distribution of this
>> e-mail message and any attached files
>> is strictly prohibited. Dickstein Shapiro reserves the right to monitor any
>> communication that is created,
>> received, or sent on its network.  If you have received this confidential
>> communication in error, please notify the
>> sender immediately by reply e-mail message and permanently delete the
>> original message.
>> To reply to our email administrator directly, send an email to
>> postmaster at dicksteinshapiro.com
>> Dickstein Shapiro LLP
>> http://www.DicksteinShapiro.com
>> ==============================================================================
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>