[cisco-voip] Unity Unified Messaging Call Hanlder Caller Input Map

[Turpin, Mark]

Unity doesn't have a call handler template (UConn does...)

 

You can copy a call handler though, so in theory you could create your
"default" and just copy it each time you wanted to add one.

 

--

MARK TURPIN  |  Systems Engineer  |  CCIE 21649 |  Insight Networking |
www.insight.com

t. 314.656.2315   c. 314.277.7948   f. 314.656.2355
mark.turpin at insight.com <mailto:mark.turpin at insight.com>  

 

The information contained in this message and any attachment may contain
privileged or confidential information protected from disclosure. If you
are not the intended recipient, or an employee or agent responsible for
delivering this message to the intended recipient, you are hereby
notified that any review, dissemination, distribution or copying of this
information is strictly prohibited.  If you have received this
transmission in error, please notify the sender immediately by replying
to this message and destroying the original and all copies.  Thank you.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tkachuk,Birni
Sent: Wednesday, May 20, 2009 2:00 PM
To: Matt Slaga (US); cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity Unified Messaging Call Hanlder Caller
Input Map

 

Isn't that just for the subscriber caller input map?  There is a caller
input map under call handler that has default settings as well.

 

Birni Tkachuk 
Voice Services Specialist 
Information Services Division      
P  780.471.7532  F  780.491.3083 
        

 

From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com] 
Sent: Wednesday, May 20, 2009 12:46 PM
To: Tkachuk,Birni; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity Unified Messaging Call Hanlder Caller
Input Map

 

It is set in the subscriber template and used when users are first
created.  Once they are created, you need to use the bulkedit app to
change everyones.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tkachuk,Birni
Sent: Wednesday, May 20, 2009 1:02 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity Unified Messaging Call Hanlder Caller Input
Map

 

Does anyone know where the default Caller Input Map is configured for
Call Handlers in Unity 5.0?

 

Birni Tkachuk 
Voice Services Specialist 
Information Services Division      
P  780.471.7532  F  780.491.3083 
        

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090520/886c5511/attachment.html>