[cisco-voip] Unity Unified Messaging Call Hanlder Caller Input Map

[Tkachuk,Birni]

That is probably what we did without realizing it.  Thanks for the tip on bulk editing.  Haven't used that before.

Birni Tkachuk
Voice Services Specialist
Information Services Division
P  780.471.7532  F  780.491.3083


From: Turpin, Mark [mailto:mark.turpin at Calence.com]
Sent: Wednesday, May 20, 2009 1:08 PM
To: Tkachuk,Birni; Matt Slaga (US); cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity Unified Messaging Call Hanlder Caller Input Map

Unity doesn't have a call handler template (UConn does...)

You can copy a call handler though, so in theory you could create your "default" and just copy it each time you wanted to add one.

--

MARK TURPIN  |  Systems Engineer  |  CCIE 21649 |  Insight Networking | www.insight.com
t. 314.656.2315   c. 314.277.7948   f. 314.656.2355  mark.turpin at insight.com<mailto:mark.turpin at insight.com>

The information contained in this message and any attachment may contain privileged or confidential information protected from disclosure. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this information is strictly prohibited.  If you have received this transmission in error, please notify the sender immediately by replying to this message and destroying the original and all copies.  Thank you.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tkachuk,Birni
Sent: Wednesday, May 20, 2009 2:00 PM
To: Matt Slaga (US); cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity Unified Messaging Call Hanlder Caller Input Map

Isn't that just for the subscriber caller input map?  There is a caller input map under call handler that has default settings as well.

Birni Tkachuk
Voice Services Specialist
Information Services Division
P  780.471.7532  F  780.491.3083


From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com]
Sent: Wednesday, May 20, 2009 12:46 PM
To: Tkachuk,Birni; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity Unified Messaging Call Hanlder Caller Input Map

It is set in the subscriber template and used when users are first created.  Once they are created, you need to use the bulkedit app to change everyones.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tkachuk,Birni
Sent: Wednesday, May 20, 2009 1:02 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity Unified Messaging Call Hanlder Caller Input Map

Does anyone know where the default Caller Input Map is configured for Call Handlers in Unity 5.0?

Birni Tkachuk
Voice Services Specialist
Information Services Division
P  780.471.7532  F  780.491.3083


________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090520/5452f770/attachment.html>