[cisco-voip] Firmware Upgrade in Preparation for Upgrade from CCM 4.1(3)sr8 to CUCM 7.X ???

[Matthew Saskin]

Agree entirely on this process. On our in-house cluster (500 phones)
it speeds things a great deal given sites at 200+ ms from the
callmanager.

For some of our customers with 20K+ phone/200+ site clusters I
couldn't imagine doing it any other way.

-matt

On 5/26/09, Dana Tong (AU) <Dana.Tong at didata.com.au> wrote:
> Hi Steve,
>
> I did the same upgrade myself in the last 3 weeks and also upgraded the
> phone firmware before cutting them over to the new 7.0(2) cluster.
> The default loads for the model phones you have stated are:
>
> (assuming SCCP)
> 7912 - CP7912080003SCCP070409A
> 7961 - SCCP41.8-4-3S
> 7936 - cmterm_7936.3-3-16-0
>
> All I did was download the windows executables for the firmware updates from
> CCO and install on the old 4.1(3) cluster (I think it even restarted the
> TFTP service as part of the install) and then reset all the phones one
> evening after hours. This made the actual cutover to the new cluster much
> quicker.
>
> Cheers
> Dana
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Miller, Steve
> Sent: Wednesday, May 27, 2009 3:47 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Firmware Upgrade in Preparation for Upgrade from CCM
> 4.1(3)sr8 to CUCM 7.X ???
>
>
>
>
> Steve Miller
> Telecom Engineer
> Dickstein Shapiro LLP
> 1825 Eye Street NW | Washington, DC 20006
> Tel (202) 420-3370| Fax (202) 330-5607
> MillerS at dicksteinshapiro.com<mailto:MillerS at dicksteinshapiro.com>
>
>
> ________________________________
> From: Miller, Steve
> Sent: Tuesday, May 26, 2009 11:59 AM
> To: cisco-voip at puck.nether.net
> Subject: Firmware Upgrade in Preparation for Upgrade from CCM 4.1(3)sr8 to
> CUCM 7.X ???
> We are currently running CCM 4.1(3)sr8 and will upgrade to CUCM 7.X in 4
> weeks.  Our current firmware which was unexpectedly included in the SR8
> upgrade is SCCP41.8-4-1SR2S.  Should we be further upgrading the firmware in
> preparation for our BIG upgrade next month?  We have 7961, 7912 and 7936
> phones.
>
> I see the latest firmware is ciscocm.4-1-DevPack-89.exe, but I don't know if
> that's compatible with 4.1(3) or if it's just for CUCM 7.X.  Any guidance
> would be greatly appreciated.  Thank you!
>
>
> Steve Miller
> Telecom Engineer
> Dickstein Shapiro LLP
> 1825 Eye Street NW | Washington, DC 20006
> Tel (202) 420-3370| Fax (202) 330-5607
> MillerS at dicksteinshapiro.com<mailto:MillerS at dicksteinshapiro.com>
>
>
> --------------------------------------------------------
>
> This e-mail message and any attached files are confidential and are intended
> solely for the use of the addressee(s)
>
> named above. This communication may contain material protected by
> attorney-client, work product, or other
>
> privileges. If you are not the intended recipient or person responsible for
> delivering this confidential
>
> communication to the intended recipient, you have received this
> communication in error, and any review, use,
>
> dissemination, forwarding, printing, copying, or other distribution of this
> e-mail message and any attached files
>
> is strictly prohibited. Dickstein Shapiro reserves the right to monitor any
> communication that is created,
>
> received, or sent on its network.  If you have received this confidential
> communication in error, please notify the
>
> sender immediately by reply e-mail message and permanently delete the
> original message.
>
>
>
> To reply to our email administrator directly, send an email to
> postmaster at dicksteinshapiro.com
>
>
>
> Dickstein Shapiro LLP
>
> http://www.DicksteinShapiro.com
>
>
>
> ==============================================================================
>
> ******************************************************************************
>  - NOTICE FROM DIMENSION DATA AUSTRALIA
> This message is confidential, and may contain proprietary or legally
> privileged information.  If you have received this email in error, please
> notify the sender and delete it immediately.
>
> Internet communications are not secure. You should scan this message and any
> attachments for viruses.  Under no circumstances do we accept liability for
> any loss or damage which may result from your receipt of this message or any
> attachments.
> ******************************************************************************
>
>