[cisco-voip] Faxing using SIP and UCM 7

[Ryan Ratliff]

Not much at all to do on the CUCM side that I can think of.

You can read about T38 in the SRND.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/ 
gateways.html#wp1047198

-Ryan

On May 28, 2009, at 3:55 PM, Michael Back wrote:

Ok, I am a little new to SIP and Faxing over IP and could use some help.
  We are evaluating RightFax and will be using SIP to make the
integration.  I already set up the SIP trunk and all the call routing,
but I am a little confused by the whole T.38 thing.  Aside from the SIP
trunk, calls go out on PRIs that plug into Cisco CMMs that use MGCP.  Do
I need to enable T.38 in IOS on the CMMs?  Do I configure this somewhere
in UCM?  Do I need to do anything with the SIP trunk I set up?  Any
assistance with this would be greatly appreciated.

MB
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip