[cisco-voip] Auto shutdown server

Paul asobihoudai at yahoo.com
Fri May 29 14:28:59 EDT 2009


In short, you'll likely need to have 'ssh <username at cucmbox> "utils system shutdown"' be issued from the UPS when a power failure occurs. It should work...in an ideal world.


----- Original Message ----
From: Voice Noob <voicenoob at gmail.com>
To: Ryan Ratliff <rratliff at cisco.com>
Cc: Paul <asobihoudai at yahoo.com>; "cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
Sent: Friday, May 29, 2009 2:05:57 PM
Subject: RE: [cisco-voip] Auto shutdown server

Never mind. It has been a while since I did any VB scripting but I can do it
in that. I will just start putty from the gui.

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Friday, May 29, 2009 12:56 PM
To: Voice Noob
Cc: 'Paul'; 'cisco-voip at puck-nether.net'
Subject: Re: [cisco-voip] Auto shutdown server

There's really nothing to keep you from writing a script to ssh into  
the server, execute the 'utils system shutdown' command, send 'yes'  
in response to the prompt, and then drop the connection.   That's  
what the blurb in the release note says to do.

-Ryan

On May 29, 2009, at 1:08 PM, Voice Noob wrote:

Great. This does not answer my question. The doc does not reference  
what I
am trying to do or a way to accomplish it.

-----Original Message-----
From: Paul [mailto:asobihoudai at yahoo.com]
Sent: Friday, May 29, 2009 12:03 PM
To: Voice Noob; cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] Auto shutdown server


Lo and behold, a quick search on cisco's website turned up this result.

http://docwiki.cisco.com/wiki/ 
Monitoring_and_Maintaining_CUCM_Appliance_Hard
ware





----- Original Message ----
From: Voice Noob <voicenoob at gmail.com>
To: Paul <asobihoudai at yahoo.com>; "cisco-voip at puck-nether.net"
<cisco-voip at puck.nether.net>
Sent: Friday, May 29, 2009 12:56:35 PM
Subject: RE: [cisco-voip] Auto shutdown server


Utils system shutdown

> From the command line. How else you going to turn it off?


-----Original Message-----
From: Paul [mailto:asobihoudai at yahoo.com]
Sent: Friday, May 29, 2009 11:54 AM
To: Voice Noob; cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] Auto shutdown server


First things first, do CUCM 7 boxes even give you access to the shutdown
command?




________________________________
From: Voice Noob <voicenoob at gmail.com>
To: Voice Noob <voicenoob at gmail.com>; "cisco-voip at puck-nether.net"
<cisco-voip at puck.nether.net>
Sent: Friday, May 29, 2009 12:43:46 PM
Subject: Re: [cisco-voip] Auto shutdown server


Has anyone done this before?

From:Voice Noob
[mailto:voicenoob at gmail.com]
Sent: Friday, May 22, 2009 9:25 AM
To: 'cisco-voip at puck-nether.net'
Subject: Auto shutdown server

Has anyone wrote a script to shutdown a server using UPS
software? My UPS software can run a script file when the battery gets  
low
but I
need to script the commands to shutdown the CUCM 7.x and Unity  
connection
7.x .




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


      



More information about the cisco-voip mailing list