[cisco-voip] Problem with a (CUCM 6 sgn.iso image DVD) or me

Fri May 29 14:56:07 EDT 2009

I want to thank you all and confirm that you are all correct. 
Yesterday I got the 6.1.3 upgrade file to load immediately from the SFTP
server as Lelio had mentioned and Wes concurred. It certainly is the way
to go.
Chris from CDW told me to try burning it as a data disc instead of
burning the iso as a disc image. I don't know what I'm doing so I took
his word for it and he was correct as well. There was a button for data
CD that I tried and the new DVD worked in the Publisher drive.
Last but not least Ryan, I mounted the first DVD in my vmware server and
I got it to work on my demo Publisher. I could see all the files.
I had a busy night but I know a lot more about burning files than I did
yesterday but still not as much as my kids do.

Thanks for all your help,
Kevin

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Friday, May 29, 2009 9:32 AM
To: Lelio Fulgenzi
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Problem with a (CUCM 6 sgn.iso image DVD) or
me

To provide a counter point I have mounted upgrade ISO files in VMWare  
and had them be read just fine for upgrades.  I don't believe that's  
any different than burning the .iso image to DVD and using the  
physical DVD.

-Ryan

On May 28, 2009, at 5:59 PM, Lelio Fulgenzi wrote:

ah - so i'm guessing you have to cut a DVD with the .iso on it as a  
file, not cut a DVD from the .iso?

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

----- Original Message -----
From: "Wes Sisk" <wsisk at cisco.com>
To: "Kevin O'Donovan (ITD)" <Kevin.Odonovan at state.ma.us>
Cc: cisco-voip at puck.nether.net
Sent: Thursday, May 28, 2009 5:50:43 PM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] Problem with a (CUCM 6 sgn.iso image DVD)  
or me

in addition, i believe the upgrade literally needs to find the .iso  
file on the disk if you choose to go that route.  we've been back and  
forth on this a few times so my recollection gets fuzzy.   SFTP is  
the cheaper option either way.  There have also been issues with some  
optical disk drives, especially in the IBM servers, where reading the  
disk drive fails.

/Wes

On Thursday, May 28, 2009 5:19:29 PM, O'Donovan, Kevin (ITD)  
<Kevin.Odonovan at state.ma.us> wrote:
Hi Lelio,

That worked but it's too easy. I need to complicate this and make  
myself work harder for it.

I'm determined to figure out this DVD iso image thingy issue stuff if  
it kills me.

Speaking of things I have little knowledge of, I have to get to  
practice to coach my U5 soccer team.

I'll work on killing myself tomorrow.

Thanks for the kick in the back side

Kevin

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
Sent: Thursday, May 28, 2009 4:57 PM
To: Kevin O'Donovan (ITD)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Problem with a (CUCM 6 sgn.iso image DVD)  
or me

Try with TFTP and see what happens. Grab a coffee after the transfer  
starts...

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

----- Original Message -----
From: "Kevin O'Donovan (ITD)" <Kevin.Odonovan at state.ma.us>
To: cisco-voip at puck.nether.net
Sent: Thursday, May 28, 2009 4:52:15 PM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] Problem with a (CUCM 6 sgn.iso image DVD) or me

Hello folks,

I'm trying to upgrade my Pub 7845 from 6.1.2 to 6.1.3

Pub works fine.

I have downloaded the upgrade for CUCM 6.1.3 part 1of2 and 2of2

Copy /b (the 2 files to one file)

Burned it to a DVD - verified the copy

I can mount it on my PC and see its contents

-I put the DVD in the tray of the PUB

-Logged into OS Admin

-Choose DVD

-Entered the /file name (I tried it with just the slash and with the / 
file name)

-Select NEXT

Nothing happens?

Have I done something wrong that someone can see?

Could it be the DVD even though I can mount it and see the contents?

Or could it just be me? I have been in a slump for a good week or so.

Thanks,

Kevin O'Donovan

  PS All legitimate, licensed with Cisco 7845, Cisco hardware etc.

_______________________________________________ cisco-voip mailing  
list cisco-voip at puck.nether.net https://puck.nether.net/mailman/ 
listinfo/cisco-voip

_______________________________________________ cisco-voip mailing  
list cisco-voip at puck.nether.net https://puck.nether.net/mailman/ 
listinfo/cisco-voip

_______________________________________________ cisco-voip mailing  
list cisco-voip at puck.nether.net https://puck.nether.net/mailman/ 
listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip