[cisco-voip] UCCX Disaster recovery

[Dustin S Fowler]

I can tell you that I have a HA pair split between two locations. One at a
colo and one at the HQ. I have a 100Mbps MetroE circuit between the
locations. May not be supported but it has worked for the past two years.

Dustin



On Fri, May 29, 2009 at 8:05 PM, Matthew Saskin <msaskin at gmail.com> wrote:

> As far as I know, 2 servers only in an HA pair and they must be at the
> same site on a LAN.  If you need redundancy across a WAN, I believe
> UCCE/ICM is the only option.
>
> -matt
>
>
> On 5/29/09, Ratko Dodevski <rade239 at gmail.com> wrote:
> > Hi, quick question... is there any limitations that prevent me to place
> UCCX
> > servers in different sites and VLANs? The customer has some strange
> > requirements, wants to place 3 servers in cluster in 3 different
> locations,
> > and i don't see how to use the 3rd server. I've done only one
> installation
> > of UCCX, and as far as I know, a can make 2 servers to work in HA as
> > active-pasive (and this is done with premium licence i think). what
> should I
> > do with the third, and is it posible to work on diferent sites?
> >
> > Thanks in advace
> >
> > --
> > Ratko
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090529/a6ddef82/attachment.html>