[cisco-voip] controller errors?

[Philip Walenta]

I am pretty sure that is one possible solution.  It's been a while since
I've had to turn a T1 up ( like > 3 years) so I'm going on memory on that
one.

 

I do know that on a properly configured circuit you will get 0 errors.

 

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Wednesday, November 04, 2009 3:53 PM
To: Philip Walenta
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] controller errors?

 

meaning I don't have "clock source line primary" on the controller?

 

Scott

On Wed, Nov 4, 2009 at 1:51 PM, Philip Walenta <pwalenta at wi.rr.com> wrote:

Slips tend to be clocking related.  Does this gateway have multiple T1's?
Is the controller set properly?  A few slips is enough to kill a fax or
modem conversation.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Wednesday, November 04, 2009 3:38 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] controller errors?

 

Good Afternoon--

 

I'm getting slip seconds and errored seconds on my PRI controller.

 

about 2-10 per 15 minutes with a total of about 200 per 24 hours.  

 

telco says they don't see anything in testing.

 

Is this a hardware issue on the VGW or a Telco problem and I need to tell
them to dispatch out and test?

 

Can someone give me a little advise?

 

Thanks

 

Scott

 

H323 2851 running 12.4.24T1

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091104/2a8168b1/attachment.html>