[cisco-voip] controller errors?

[Charles Goldsmith]

I see this on all of my PRI's that use a T1-crossover cable.  I've
remade the cables several times but get the same thing on all of them
(3 connections).

This is on VWIC-2MFT-T1 modules in different routers.  The routers are
2821 and 3845s.

I haven't seen this cause any problems, so I didn't pursue it.

I know this doesn't answer your question, but I don't think its out of
the ordinary, but I could be wrong on that.

Charles

On Wed, Nov 4, 2009 at 3:37 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> Good Afternoon--
> I'm getting slip seconds and errored seconds on my PRI controller.
> about 2-10 per 15 minutes with a total of about 200 per 24 hours.
> telco says they don't see anything in testing.
> Is this a hardware issue on the VGW or a Telco problem and I need to tell
> them to dispatch out and test?
> Can someone give me a little advise?
> Thanks
> Scott
> H323 2851 running 12.4.24T1
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>