[cisco-voip] Unity Connection Problem

Lelio Fulgenzi lelio at uoguelph.ca
Thu Nov 5 10:19:54 EST 2009


In Unity Connection, with the call flow you describe, the call will be answered by x6204's voice mail box. 

So I would check the standard greeting for x6204. 

If there is no x6204 voice mail box, and x6204 is not an alternate extension in another voice mail box, then it will be answered by the opening greeting. (Depending on your routing rules) 

So I would then check the standard greeting of the opening greeting. 

If x6204 is an alternate extension of another voice mail box, I would check that vm box standard greeting. (You'll need to use CUDLI to search for alternate extensions. :( ) 

If x6204 is an alternate extension for x6205, well, then, I'm stumped. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Lisa Notarianni" <notariannil1 at scranton.edu> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net 
Sent: Thursday, November 5, 2009 10:13:57 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Unity Connection Problem 

If someone calls x6204 after 5 rings it bounces to x6205. x6205 rings 3 times and then it goes to the voice mail beep. The greeting is not playing. 

However, if I call x6205 directly it rings 3 times then the greeting plays. 

Lelio Fulgenzi wrote: 


I guess I'm not understanding the problem. From your comments below, you mention "x6204 after busy or no answer is set in Call Manager to go to x6205. This happens correctly, but it goes directly to beep without hearing the greeting" made me think that you dial x6204 and it goes to x6205 correctly when x6204 is busy/noans. 

Maybe you can lay it out in a bit more detail for us. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Lisa Notarianni" <notariannil1 at scranton.edu> 
To: cisco-voip at puck.nether.net 
Sent: Thursday, November 5, 2009 9:54:00 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Unity Connection Problem 

Lelio, 

The phone is not busy. 

Lisa 

Lisa Notarianni wrote: 

We are running Cisco Unity Connection version: 7.1.2.20000-140. 

If I call x6205 directly it goes to the voice mailbox as it should. 

However, x6204 after busy or no answer is set in Call Manager to go to x6205. 
This happens correctly, but it goes directly to beep without hearing the greeting. 

There must be a setting to say if x6204 bounces to x6205 it should go directly to beep if no one answers. I cannot find it anywhere. 

Any ideas? 


-- 

_______________________________________________
cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 

-- 

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 

-- 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091105/5680d696/attachment.html>


More information about the cisco-voip mailing list