[cisco-voip] (no subject)

[Jeff Garvas]

Setup a dedicated CSS that is a member of a dedicated partition that has a
blank translation pattern that translates to the number you want it to
ring.   Give the translation pattern whatever CSS is necessary to call that
DN.  Assign that CSS to the ATA port, and when you go off hook it'll call
that number immediately assuming your intercom button is equivilant to going
off hook.

Its a common PLAR solution.


On Fri, Nov 6, 2009 at 1:37 PM, Sean Knight <sean at pubsvs.com> wrote:

>  We have a door intercom system that when you press the intercom button we
> want to call a specific number.  We are going to have it set up with an
> ATA device.  Is there a way to do that?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091106/b95decb5/attachment.html>