[cisco-voip] (no subject)

[Jeff Garvas]

Let me clarify that....  assign the first CSS to the ATA port, not
necessarily the one you used within the translation pattern.

On Fri, Nov 6, 2009 at 1:46 PM, Jeff Garvas <jeff at cia.net> wrote:

> Setup a dedicated CSS that is a member of a dedicated partition that has a
> blank translation pattern that translates to the number you want it to
> ring.   Give the translation pattern whatever CSS is necessary to call that
> DN.  Assign that CSS to the ATA port, and when you go off hook it'll call
> that number immediately assuming your intercom button is equivilant to going
> off hook.
>
> Its a common PLAR solution.
>
>
> On Fri, Nov 6, 2009 at 1:37 PM, Sean Knight <sean at pubsvs.com> wrote:
>
>>  We have a door intercom system that when you press the intercom button
>> we want to call a specific number.  We are going to have it set up with
>> an ATA device.  Is there a way to do that?
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091106/753ff06a/attachment.html>