[cisco-voip] (no subject)

[Fuermann, Jason]

Are you sure you don't program the intercom? Don't think I've seen one that just goes off hook

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Garvas
Sent: Friday, November 06, 2009 12:50 PM
To: Sean Knight
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] (no subject)

Let me clarify that....  assign the first CSS to the ATA port, not necessarily the one you used within the translation pattern.
On Fri, Nov 6, 2009 at 1:46 PM, Jeff Garvas <jeff at cia.net<mailto:jeff at cia.net>> wrote:
Setup a dedicated CSS that is a member of a dedicated partition that has a blank translation pattern that translates to the number you want it to ring.   Give the translation pattern whatever CSS is necessary to call that DN.  Assign that CSS to the ATA port, and when you go off hook it'll call that number immediately assuming your intercom button is equivilant to going off hook.

Its a common PLAR solution.

On Fri, Nov 6, 2009 at 1:37 PM, Sean Knight <sean at pubsvs.com<mailto:sean at pubsvs.com>> wrote:

We have a door intercom system that when you press the intercom button we want to call a specific number.  We are going to have it set up with an ATA device.  Is there a way to do that?

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091106/3fefa01c/attachment.html>