[cisco-voip] Setting up Test PRI with the ability to call in

[Monica Hardy]

Hello,

I have a test PRI that I can call out from fine.  I want to test
incoming calls for a SRST router with this PRI before I ship the router

out.  How can I test incoming calls on this test PRI?  I think I need to
build a translation pattern.  I do know the first 5 numbers in the DID
range.

 

What do I need to do to get this working?

 

I am running CCM 7.0.2

 

Thank you

 

-Monica

 

--------------------------------------------

 

 

 

Monica P. Hardy

Openwave

Sr. Network Engineer

Phone: 650-480-5597

email:  monica.hardy at openwave.com <mailto:monica.hardy at openwave.com> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091109/7c2bf254/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 2361 bytes
Desc: image001.gif
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091109/7c2bf254/attachment.gif>