[cisco-voip] Setting up Test PRI with the ability to call in

[Ryan Ratliff]

If you want to test the SRST router then you'll need the DID numbers  
that route calls into that PRI.  CUCM translation patterns won't help  
since when in SRST mode the router doesn't have connectivity to the  
CUCM server.

-Ryan

On Nov 9, 2009, at 6:35 PM, Monica Hardy wrote:

Hello,
I have a test PRI that I can call out from fine.  I want to test  
incoming calls for a SRST router with this PRI before I ship the router
out.  How can I test incoming calls on this test PRI?  I think I need  
to build a translation pattern.  I do know the first 5 numbers in the  
DID range.

What do I need to do to get this working?

I am running CCM 7.0.2

Thank you

-Monica

--------------------------------------------

<image001.gif>

Monica P. Hardy
Openwave
Sr. Network Engineer
Phone: 650-480-5597
email:  monica.hardy at openwave.com

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091109/db9378d0/attachment.html>