[cisco-voip] SmarterMail as SMTP relay for Connection and RTMT

[Tim Smith]

Ah ok.. so that really looks like a server error then. Do you have support
on the mail server?

Cheers,

Tim

On Wed, Nov 11, 2009 at 9:27 AM, Tim Frazee <tfrazee at gmail.com> wrote:

> i have the smartermail server to bypass smtp auth. and I see in the logs
> that it does the handshake just fine, it freaks out during the "data
> transfer" step.
>
> logs:
>
> i replaced the customer's domain with example.com. the ip address is not a
> public facing ip.
>
> 17:22:44 [206.94.136.85][15471648] rsp: 220 mail.example.com
> 17:22:44 [206.94.136.85][15471648] connected at 11/10/2009 5:22:44 PM
> 17:22:44 [206.94.136.85][15471648] cmd: EHLO CONN-71043914
> 17:22:44 [206.94.136.85][15471648] rsp: 250-mail.example.com Hello
> [206.94.136.85] 250-SIZE 31457280 250-AUTH LOGIN CRAM-MD5 250 OK
> 17:22:44 [206.94.136.85][15471648] cmd: MAIL
> FROM:<unityconnection at conn-71043914>
> 17:22:44 [206.94.136.85][15471648] rsp: 250 OK
> <unityconnection at conn-71043914> Sender ok
> 17:22:44 [206.94.136.85][15471648] cmd: RCPT TO:<tfrazee at example.com>
> 17:22:44 [206.94.136.85][15471648] rsp: 250 OK <tfrazee at example.com>
> Recipient ok
> 17:22:44 [206.94.136.85][15471648] cmd: DATA
> 17:23:00 [206.94.136.85][15471648] rsp: 354 Start mail input; end with
> <CRLF>.<CRLF>
> 17:23:00 [206.94.136.85][15471648] data transfer failed.
> 17:23:00 [206.94.136.85][15471648] disconnected at 11/10/2009 5:23:00 PM
>
>
>
>
> On Tue, Nov 10, 2009 at 4:07 PM, Tim Smith <thsglobal at gmail.com> wrote:
>
>> Hey mate...
>>
>> Normal thing with SMTP relays is whether your server / device is
>> authorised to send / relay mail.
>> Im not familiar with SmarterMail itself.
>> But the authorisation is usually done by server IP address, or by
>> authenticating the user with a username and password.
>>
>> Also, another one is whether you are allowed to relay to the destination
>> domain.
>>
>> If UC was on a windows box I'd suggest to test via telnet - manually
>> sending a mail from the server. But since its not, I'd probably suggest to
>> grab a packet capture. It will show you whether UCM is sending the SMTP to
>> the right place, and it will show you whether the SMTP server is responding,
>> and whether it accepted or rejected your attempt and why.
>>
>> Cheers,
>>
>> Tim.
>>
>>
>> On Wed, Nov 11, 2009 at 7:46 AM, Tim Frazee <tfrazee at gmail.com> wrote:
>>
>>> hello group,
>>>
>>> I have a client who is running smartermail enterprise 4.3 email server
>>> and running UCM 7.1(2) with Connection 7.1(2). I want to setup message
>>> notification for voice mails and have set the internal ip address of the
>>> SmarterMail server as the smart host in Connection Administration.
>>>
>>> Does anyone have any experience with smartermail? I have setup what
>>> appears to be whats needed to make this work, however I don't receive any
>>> emails from my connection server to tell me I have a voice mail.
>>>
>>> Any help would be greatly appreciated.
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>>
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>>
>> --
>>
>> Cheers,
>>
>> Tim
>>
>>
>> Sent from Sydney, Nsw, Australia
>>
>
>


-- 

Cheers,

Tim


Sent from Sydney, Nsw, Australia
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091111/7c01fd23/attachment.html>