[cisco-voip] SmarterMail as SMTP relay for Connection and RTMT

[Tim Frazee]

i have the smartermail server to bypass smtp auth. and I see in the logs
that it does the handshake just fine, it freaks out during the "data
transfer" step.

logs:

i replaced the customer's domain with example.com. the ip address is not a
public facing ip.

17:22:44 [206.94.136.85][15471648] rsp: 220 mail.example.com
17:22:44 [206.94.136.85][15471648] connected at 11/10/2009 5:22:44 PM
17:22:44 [206.94.136.85][15471648] cmd: EHLO CONN-71043914
17:22:44 [206.94.136.85][15471648] rsp: 250-mail.example.com Hello
[206.94.136.85] 250-SIZE 31457280 250-AUTH LOGIN CRAM-MD5 250 OK
17:22:44 [206.94.136.85][15471648] cmd: MAIL
FROM:<unityconnection at conn-71043914>
17:22:44 [206.94.136.85][15471648] rsp: 250 OK
<unityconnection at conn-71043914> Sender ok
17:22:44 [206.94.136.85][15471648] cmd: RCPT TO:<tfrazee at example.com>
17:22:44 [206.94.136.85][15471648] rsp: 250 OK <tfrazee at example.com>
Recipient ok
17:22:44 [206.94.136.85][15471648] cmd: DATA
17:23:00 [206.94.136.85][15471648] rsp: 354 Start mail input; end with
<CRLF>.<CRLF>
17:23:00 [206.94.136.85][15471648] data transfer failed.
17:23:00 [206.94.136.85][15471648] disconnected at 11/10/2009 5:23:00 PM



On Tue, Nov 10, 2009 at 4:07 PM, Tim Smith <thsglobal at gmail.com> wrote:

> Hey mate...
>
> Normal thing with SMTP relays is whether your server / device is authorised
> to send / relay mail.
> Im not familiar with SmarterMail itself.
> But the authorisation is usually done by server IP address, or by
> authenticating the user with a username and password.
>
> Also, another one is whether you are allowed to relay to the destination
> domain.
>
> If UC was on a windows box I'd suggest to test via telnet - manually
> sending a mail from the server. But since its not, I'd probably suggest to
> grab a packet capture. It will show you whether UCM is sending the SMTP to
> the right place, and it will show you whether the SMTP server is responding,
> and whether it accepted or rejected your attempt and why.
>
> Cheers,
>
> Tim.
>
>
> On Wed, Nov 11, 2009 at 7:46 AM, Tim Frazee <tfrazee at gmail.com> wrote:
>
>> hello group,
>>
>> I have a client who is running smartermail enterprise 4.3 email server and
>> running UCM 7.1(2) with Connection 7.1(2). I want to setup message
>> notification for voice mails and have set the internal ip address of the
>> SmarterMail server as the smart host in Connection Administration.
>>
>> Does anyone have any experience with smartermail? I have setup what
>> appears to be whats needed to make this work, however I don't receive any
>> emails from my connection server to tell me I have a voice mail.
>>
>> Any help would be greatly appreciated.
>>
>> _______________________________________________
>> cisco-voip mailing list
>>
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
> --
>
> Cheers,
>
> Tim
>
>
> Sent from Sydney, Nsw, Australia
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091110/a87260c6/attachment.html>