[cisco-voip] SmarterMail as SMTP relay for Connection and RTMT

[Tim Smith]

Hey mate...

Normal thing with SMTP relays is whether your server / device is authorised
to send / relay mail.
Im not familiar with SmarterMail itself.
But the authorisation is usually done by server IP address, or by
authenticating the user with a username and password.

Also, another one is whether you are allowed to relay to the destination
domain.

If UC was on a windows box I'd suggest to test via telnet - manually sending
a mail from the server. But since its not, I'd probably suggest to grab a
packet capture. It will show you whether UCM is sending the SMTP to the
right place, and it will show you whether the SMTP server is responding, and
whether it accepted or rejected your attempt and why.

Cheers,

Tim.


On Wed, Nov 11, 2009 at 7:46 AM, Tim Frazee <tfrazee at gmail.com> wrote:

> hello group,
>
> I have a client who is running smartermail enterprise 4.3 email server and
> running UCM 7.1(2) with Connection 7.1(2). I want to setup message
> notification for voice mails and have set the internal ip address of the
> SmarterMail server as the smart host in Connection Administration.
>
> Does anyone have any experience with smartermail? I have setup what appears
> to be whats needed to make this work, however I don't receive any emails
> from my connection server to tell me I have a voice mail.
>
> Any help would be greatly appreciated.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 

Cheers,

Tim


Sent from Sydney, Nsw, Australia
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091111/94259c77/attachment.html>