[cisco-voip] ios VGW error after moving from CMM

[Ryan Ratliff]

.Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> CONNECT pd = 8  callref = 0x837A
.Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> DISCONNECT pd = 8  callref = 0x837A
        Cause i = 0x8090 - Normal call clearing

What's on the back end of this?  You are sending connect and disconnect at the exact same time.  

-Ryan

On Nov 16, 2009, at 10:36 PM, Scott Voll wrote:

hey guys I just moved from my CMM to an IOS VGW.

I'm recieving these on the q931 debugs:

Calling Party Number i = 0x2183, '5035702995'
                Plan:ISDN, Type:National
        Called Party Number i = 0x80, '3783'
                Plan:Unknown, Type:Unknown
.Nov 17 03:35:06.565: ISDN Se0/0/1:23 Q931: Received SETUP  callref = 0x837A callID = 0x001C switch = primary-ni interface = User
.Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> CALL_PROC pd = 8  callref = 0x837A
        Channel ID i = 0xA98397
                Exclusive, Channel 23
.Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> CONNECT pd = 8  callref = 0x837A
.Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> DISCONNECT pd = 8  callref = 0x837A
        Cause i = 0x8090 - Normal call clearing
 --More--
.Nov 17 03:35:06.597: ISDN Se0/0/1:23 Q931: RX <- CONNECT_ACK pd = 8  callref = 0x037A
.Nov 17 03:35:06.601: ISDN Se0/0/1:23 **ERROR**: Ux_BadMsg: Invalid Message for call state 11, call id 0x1C, call ref 0x837A, event 0xF
.Nov 17 03:35:06.601: ISDN Se0/0/1:23 Q931: TX -> STATUS pd = 8  callref = 0x837A
        Cause i = 0xC0E50F - Message not compatible with call state
        Call State i = 0x0B
.Nov 17 03:35:06.665: ISDN Se0/0/1:23 Q931: RX <- RELEASE pd = 8  callref = 0x037A
.Nov 17 03:35:06.669: ISDN Se0/0/1:23 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x837A

I'm not finding much.  Any ideas?  I opened a TAC case.

Scott
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip