[cisco-voip] ios VGW error after moving from CMM

[Scott Voll]

found the issue.  it was the ani_filter.tcl script.  I did not give it a
destination..... thus it was killing all calls coming in.

Felt really stupid when we removed the TCL script from the inbound dial
peer.

Thanks Ryan

Scott

On Tue, Nov 17, 2009 at 6:04 AM, Ryan Ratliff <rratliff at cisco.com> wrote:

> .Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> CONNECT pd = 8  callref =
> 0x837A
> .Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> DISCONNECT pd = 8
>  callref = 0x837A
>        Cause i = 0x8090 - Normal call clearing
>
> What's on the back end of this?  You are sending connect and disconnect at
> the exact same time.
>
> -Ryan
>
> On Nov 16, 2009, at 10:36 PM, Scott Voll wrote:
>
> hey guys I just moved from my CMM to an IOS VGW.
>
> I'm recieving these on the q931 debugs:
>
> Calling Party Number i = 0x2183, '5035702995'
>                Plan:ISDN, Type:National
>        Called Party Number i = 0x80, '3783'
>                Plan:Unknown, Type:Unknown
> .Nov 17 03:35:06.565: ISDN Se0/0/1:23 Q931: Received SETUP  callref =
> 0x837A callID = 0x001C switch = primary-ni interface = User
> .Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> CALL_PROC pd = 8  callref
> = 0x837A
>        Channel ID i = 0xA98397
>                Exclusive, Channel 23
> .Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> CONNECT pd = 8  callref =
> 0x837A
> .Nov 17 03:35:06.581: ISDN Se0/0/1:23 Q931: TX -> DISCONNECT pd = 8
>  callref = 0x837A
>        Cause i = 0x8090 - Normal call clearing
>  --More--
> .Nov 17 03:35:06.597: ISDN Se0/0/1:23 Q931: RX <- CONNECT_ACK pd = 8
>  callref = 0x037A
> .Nov 17 03:35:06.601: ISDN Se0/0/1:23 **ERROR**: Ux_BadMsg: Invalid Message
> for call state 11, call id 0x1C, call ref 0x837A, event 0xF
> .Nov 17 03:35:06.601: ISDN Se0/0/1:23 Q931: TX -> STATUS pd = 8  callref =
> 0x837A
>        Cause i = 0xC0E50F - Message not compatible with call state
>        Call State i = 0x0B
> .Nov 17 03:35:06.665: ISDN Se0/0/1:23 Q931: RX <- RELEASE pd = 8  callref =
> 0x037A
> .Nov 17 03:35:06.669: ISDN Se0/0/1:23 Q931: TX -> RELEASE_COMP pd = 8
>  callref = 0x837A
>
> I'm not finding much.  Any ideas?  I opened a TAC case.
>
> Scott
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091117/8390e7b8/attachment.html>