[cisco-voip] QoS on a 2960

[O'Brien, Neil]

Hey,

 

I've configured auto qos on my 2960 for Cisco IP Phones.

 

I've run this on 3560's but have enver seen then do this.

 

It sets up policy maps to police the EF traffic to 1Mb/s and the exceed
action remarks everthing to 0

 

I don't understand?? Any ideas??

 

interface FastEthernet0/1

 speed 100

 duplex full

 srr-queue bandwidth share 10 10 60 20

 priority-queue out 

 mls qos trust device cisco-phone

 mls qos trust cos

 auto qos voip cisco-phone 

 service-policy input AutoQoS-Police-CiscoPhone

 

policy-map AutoQoS-Police-CiscoPhone

 class AutoQoS-VoIP-RTP-Trust

  set dscp ef

  police 1000000 8000 exceed-action policed-dscp-transmit

 class AutoQoS-VoIP-Control-Trust

  set dscp cs3

  police 1000000 8000 exceed-action policed-dscp-transmit

 

mls qos map policed-dscp  24 26 46 to 0

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091118/8043fb84/attachment.html>