[cisco-voip] Query for DN Active/Inactive

[Denis Pointer]

Also keep in mind that "unassigned" is not always inactive.  I have a
deployment where we have several phantom mailboxes, to allow calls into
these mailboxes we created an active / unassigned DN with Call Forward All
to voicemail.


--
Denis Pointer, A. Sc. T.
Customer Systems Analyst (Senior Design)

CCVP, CCNA, CCDA
Cisco Unified Contact Center Specialist
Cisco IP Telephony Design Specialist
Cisco Unity Design Specialist
Cisco Unity Support Specialist
Cisco IP Communications Express Specialist


On Wed, Nov 18, 2009 at 5:57 PM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

>  I agree, what is the definition of active?  Maybe the phone is Assigned
> to Line 1 but that person was fired 6 months ago, is that inactive?
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Fuller, Ben
> *Sent:* Wednesday, November 18, 2009 6:08 PM
> *To:* Daniel Rodriguez; cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Query for DN Active/Inactive
>
>
>
> Hi Dan,
>
>
>
> If you are looking for ‘Unassigned DNs’, they can be queried in /ccmadmin
> under Call Routing > Route Plan Report.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Daniel Rodriguez
> *Sent:* Thursday, 19 November 2009 9:04 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Query for DN Active/Inactive
>
>
>
> Folks:
>
>
>
>       I’m trying to search for inactive directory numbers in CUCM. It can’t
> be done within the CUCM web GUI since the only fields to search under are
> DN, description, and partition. I exported the output of SELECT * from
> numplan to CSV and looked at all the columns, but I can’t seem to find the
> column for active/inactive status. Maybe I’m just blind or just looking at
> the wrong table. Data dictionary is usually helpful but searching for
> “active” comes back w/ hundreds of results. Dumping DA from DNA also doesn’t
> show active/inactive status of my DNs.
>
>
>
>       Thanks in advance.
>
>
>
> - Dan
>
>
>  ------------------------------
>
> CONFIDENTIALITY - The information contained in this electronic mail message
> is confidential and is intended solely for the addressee(s). If you are not
> an authorised recipient of this message please contact UXC Getronics
> Australia immediately by reply email and destroy/delete this message from
> your computer. Any unauthorised form of reproduction of this message, or
> part thereof, is strictly prohibited.
> DISCLAIMER - Unless specifically indicated otherwise, the views and
> opinions expressed in this email are those of the sender and not UXC
> Getronics Australia. While we endeavour to protect our network from computer
> viruses, UXC Getronics Australia does not warrant that this email or any
> attachments are free of viruses or any other defects or errors. It is the
> duty of the recipient to virus scan and otherwise test any information
> contained in this email before loading onto any computer system.
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091119/c5bd7209/attachment.html>