[cisco-voip] VWIC2-2MFT-T1/E1 for non-voice data ?

[Scott Voll]

Thanks guys.

This is my first new gen card for data T1s.

Scott

On Thu, Nov 19, 2009 at 8:41 AM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

> controller T1 0/0/0
>
> channel-group 0 timeslots 1-24
>
>
>
> Configure the controllers as such. You will then get serial0/0/0:0 and that
> acts just like a regular data only t1
>
>
>
>
>
> *Matthew Loraditch*
> 1965 Greenspring Drive
>
> Timonium, MD 21093
> support at heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com
> Support Issue? Email support at heliontechnologies.com for fast assistance!
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Scott Voll
> *Sent:* Thursday, November 19, 2009 11:23 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] VWIC2-2MFT-T1/E1 for non-voice data ?
>
>
>
> Can I use a VWIC2-2MFT-T1/E1 for just a point to point data T1?
>
>
>
> if so, how do I get the serial interfaces setup?  I can add card type, but
> then I get a controller T1 like it's a voice PRI not a regular t1 data
> interface serial x/x/x
>
>
>
> Thanks
>
>
>
> Scott
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091119/25e1bb27/attachment.html>