[cisco-voip] Caller ID changing to inbound dialpeer

[Steve G]

why do you have service ani_filter on an outbound 9911 dial-peer?  why do
you have answer-address .... on a 9911 dial-peer?  why do you
have direct-inward-dial on an outbound 9911 dial-peer?

On Fri, Nov 20, 2009 at 8:06 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> I just switched from a CMM blade to an ISR VGW.  Setup everything pretty
> much the same.
>
> IOS is 12.4.24t2
>
> but if a call comes in with OUT caller ID, it looks like it's being changed
> to my inbound call leg's destination-pattern (9911).  Nice..... so everyone
> is getting calls from 9911 and wondering why the PSAP is calling them.....
> with it seems to be a dial-peer issue on my part.  can someone give me some
> guidance.
>
> dial-peer voice 1 pots
>  preference 1
>  service ani_filter
>  answer-address ....
>  destination-pattern 9911
>  direct-inward-dial
>  port 0/0/0:23
>  forward-digits 3
>
> thanks
>
> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091120/3462cac0/attachment.html>