[cisco-voip] Caller ID changing to inbound dialpeer

[Scott Voll]

I just switched from a CMM blade to an ISR VGW.  Setup everything pretty
much the same.

IOS is 12.4.24t2

but if a call comes in with OUT caller ID, it looks like it's being changed
to my inbound call leg's destination-pattern (9911).  Nice..... so everyone
is getting calls from 9911 and wondering why the PSAP is calling them.....
with it seems to be a dial-peer issue on my part.  can someone give me some
guidance.

dial-peer voice 1 pots
 preference 1
 service ani_filter
 answer-address ....
 destination-pattern 9911
 direct-inward-dial
 port 0/0/0:23
 forward-digits 3

thanks

Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091120/45c51ee8/attachment.html>