[cisco-voip] sub: Polycom rmx1000

[venkata sashank]

The name of that site is www.vtctalk.com. thanks for the suggestion :-)


On Sat, Nov 21, 2009 at 9:04 AM, venkata sashank <reachsashank at gmail.com>wrote:

> That site is on sale dude :-)
>
>
> On Sat, Nov 21, 2009 at 1:13 AM, Philip Walenta <pwalenta at wi.rr.com>wrote:
>
>>  This really isn’t the right forum to discuss completely non-Cisco
>> related devices.
>>
>>
>>
>> If you want VC help I recommend checking here:
>>
>>
>>
>> http://www.vctalk.com
>>
>>
>>
>> That site is entirely devoted to video conferencing and someone there is
>> likely able to help you.
>>
>>
>>
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *venkata sashank
>> *Sent:* Friday, November 20, 2009 10:03 AM
>> *To:* Huffman, Tim
>> *Cc:* cisco-voip at puck.nether.net
>> *Subject:* Re: [cisco-voip] sub: Polycom rmx1000
>>
>>
>>
>> Thanks for the response. I have rebooted it thrice, still the same issue.
>> One more thing i see that it doesnt have any voice or video ports. could
>> that be a problem any wild guess?
>>
>> On Fri, Nov 20, 2009 at 9:19 PM, Huffman, Tim <thuffman at rosettastone.com>
>> wrote:
>>
>> I don’t have these model of units, but I have found Polycom equipment to
>> be very odd at times.  Usually just rebooting HDX units takes care of most
>> problems.
>>
>>
>>
>> Have you rebooted all units involved?
>>
>>
>>
>> Thanks,
>>
>>
>>
>> *Tim Huffman*
>>
>> Rosetta Stone®
>>
>> Cisco Telephony Administrator
>>
>> *T (540) 236-5077*
>>
>> (800) 788-0822
>>
>> RosettaStone.com
>>
>> [image: logo]
>>
>> *This e-mail and any attachments thereto are intended only for use by the
>> addressee(s) named herein and may contain legally privileged and/or
>> confidential information. If you are not the intended recipient of this
>> e-mail, you are hereby notified that any dissemination, distribution or
>> copying of this email, and any attachments thereto, is strictly prohibited.
>> If you receive this email in error please contact the sender by reply email
>> and destroy all copies of the original message.*
>>
>>
>>
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *venkata sashank
>> *Sent:* Friday, November 20, 2009 10:42 AM
>> *To:* cisco-voip at puck.nether.net
>> *Subject:* [cisco-voip] sub: Polycom rmx1000
>>
>>
>>
>> Dear All,
>>
>>
>>
>> Has any one worked on Polycom rmx1000 video conferencing unit. I just have
>> some problem with it. I have a rmx 1000 and 2 v700s for installation
>> purpose. Calls between the 2 v700 is working fine. when i call from v700 to
>> rmx on  v700 i get hte following error"Your call could not be completed
>> because the call was routed throughan intermediate network that does not
>> service far site. contact your administrator for further suggestions.
>> Unfortunately i am the administrator and i dont know what to do. Any
>> suggestions would be greatly helpful to me.
>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091121/21ed7e05/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1952 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091121/21ed7e05/attachment.jpe>