[cisco-voip] sub: Polycom rmx1000

[venkata sashank]

That site is on sale dude :-)

On Sat, Nov 21, 2009 at 1:13 AM, Philip Walenta <pwalenta at wi.rr.com> wrote:

>  This really isn’t the right forum to discuss completely non-Cisco related
> devices.
>
>
>
> If you want VC help I recommend checking here:
>
>
>
> http://www.vctalk.com
>
>
>
> That site is entirely devoted to video conferencing and someone there is
> likely able to help you.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *venkata sashank
> *Sent:* Friday, November 20, 2009 10:03 AM
> *To:* Huffman, Tim
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] sub: Polycom rmx1000
>
>
>
> Thanks for the response. I have rebooted it thrice, still the same issue.
> One more thing i see that it doesnt have any voice or video ports. could
> that be a problem any wild guess?
>
> On Fri, Nov 20, 2009 at 9:19 PM, Huffman, Tim <thuffman at rosettastone.com>
> wrote:
>
> I don’t have these model of units, but I have found Polycom equipment to be
> very odd at times.  Usually just rebooting HDX units takes care of most
> problems.
>
>
>
> Have you rebooted all units involved?
>
>
>
> Thanks,
>
>
>
> *Tim Huffman*
>
> Rosetta Stone®
>
> Cisco Telephony Administrator
>
> *T (540) 236-5077*
>
> (800) 788-0822
>
> RosettaStone.com
>
> [image: logo]
>
> *This e-mail and any attachments thereto are intended only for use by the
> addressee(s) named herein and may contain legally privileged and/or
> confidential information. If you are not the intended recipient of this
> e-mail, you are hereby notified that any dissemination, distribution or
> copying of this email, and any attachments thereto, is strictly prohibited.
> If you receive this email in error please contact the sender by reply email
> and destroy all copies of the original message.*
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *venkata sashank
> *Sent:* Friday, November 20, 2009 10:42 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] sub: Polycom rmx1000
>
>
>
> Dear All,
>
>
>
> Has any one worked on Polycom rmx1000 video conferencing unit. I just have
> some problem with it. I have a rmx 1000 and 2 v700s for installation
> purpose. Calls between the 2 v700 is working fine. when i call from v700 to
> rmx on  v700 i get hte following error"Your call could not be completed
> because the call was routed throughan intermediate network that does not
> service far site. contact your administrator for further suggestions.
> Unfortunately i am the administrator and i dont know what to do. Any
> suggestions would be greatly helpful to me.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091121/0f4e7004/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1952 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091121/0f4e7004/attachment.jpe>