[cisco-voip] sub: Polycom rmx1000

[Philip Walenta]

This really isn't the right forum to discuss completely non-Cisco related
devices.

 

If you want VC help I recommend checking here:

 

http://www.vctalk.com

 

That site is entirely devoted to video conferencing and someone there is
likely able to help you.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of venkata sashank
Sent: Friday, November 20, 2009 10:03 AM
To: Huffman, Tim
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] sub: Polycom rmx1000

 

Thanks for the response. I have rebooted it thrice, still the same issue.
One more thing i see that it doesnt have any voice or video ports. could
that be a problem any wild guess?

On Fri, Nov 20, 2009 at 9:19 PM, Huffman, Tim <thuffman at rosettastone.com>
wrote:

I don't have these model of units, but I have found Polycom equipment to be
very odd at times.  Usually just rebooting HDX units takes care of most
problems.

 

Have you rebooted all units involved?

 

Thanks,

 

Tim Huffman

Rosetta StoneR

Cisco Telephony Administrator

T (540) 236-5077

(800) 788-0822

RosettaStone.com

logo

This e-mail and any attachments thereto are intended only for use by the
addressee(s) named herein and may contain legally privileged and/or
confidential information. If you are not the intended recipient of this
e-mail, you are hereby notified that any dissemination, distribution or
copying of this email, and any attachments thereto, is strictly prohibited.
If you receive this email in error please contact the sender by reply email
and destroy all copies of the original message.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of venkata sashank
Sent: Friday, November 20, 2009 10:42 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] sub: Polycom rmx1000

 

Dear All,

 

Has any one worked on Polycom rmx1000 video conferencing unit. I just have
some problem with it. I have a rmx 1000 and 2 v700s for installation
purpose. Calls between the 2 v700 is working fine. when i call from v700 to
rmx on  v700 i get hte following error"Your call could not be completed
because the call was routed throughan intermediate network that does not
service far site. contact your administrator for further suggestions.
Unfortunately i am the administrator and i dont know what to do. Any
suggestions would be greatly helpful to me.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091120/ad365efc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1952 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091120/ad365efc/attachment.jpe>