[cisco-voip] Number Transformation on Inbound Calls

[Nate VanMaren]

The best way to do this is with + dialing.  Look at the dialplan section of the CM 7 SRND.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Berry, Matthew J.
Sent: Friday, November 20, 2009 1:17 PM
To: ccie_voice at onlinestudylist.com; cisco-voip at puck.nether.net
Subject: [cisco-voip] Number Transformation on Inbound Calls

All -

I am looking for an easy way to prefix incoming calls with a 91 so that when a user tries to use the "Missed Calls" or "Received Calls" function, they don't need to use the "Edit Dial" feature.

I found an option under Service Parameters, which works.  However, I am trying to find a way to set things up so the incoming call does not show 91, but when a sure tries to use the "Missed Calls" button, the 91 is there.  Is there some sort of number transformation that can be done.

Thanks,

Matthew Berry, Sr. Unified Communications Engineer, CCVP
Kroll Ontrack  |  9023 Columbine Road, Eden Prairie, MN 55347
952 516 3748  |  Fax 952 562 2175  |  Mobile 952 221 2814|  mjberry at krollontrack.com<mailto:agutzmer at krollontrack.com>
www.krollontrack.com<http://www.krollontrack.com/>


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091120/85374d6f/attachment.html>