[cisco-voip] 3rd party SIP questions

Craig Staffin craig at staffin.org
Tue Nov 24 15:00:58 EST 2009


what does the config look like for the SIP ephone

voice pools and voice register global

Also SIP phones do not support voice-class codec they only support a hard
coded codec.

Lastly what version of CME/IOS


On Tue, Nov 24, 2009 at 1:56 PM, Leslie Meade <lmeade at signal.ca> wrote:

> I am trying to wrap my head around this. I have a CME site with CUE and it
> is working great. I am wanting to run some 3rd party SIP clients on this.
> I can set them up and call them from the Main office with no problems. But I
> only get inbound ring tone and “dead air”. So I am looking at a Codex issue
> ? But if my CUE is working this should tell me that I am able to transcode
> G711 into G729.
>
>
>
> Any help in pointing me in the right direction ?
>
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091124/609c79e5/attachment.html>


More information about the cisco-voip mailing list