[cisco-voip] 3rd party SIP questions

[Mark Holloway]

What happens if you force all endpoints to G.711 and place a call?

On Nov 24, 2009, at 12:56 PM, Leslie Meade wrote:

> I am trying to wrap my head around this. I have a CME site with CUE and it is working great. I am wanting to run some 3rd party SIP clients on this. I can set them up and call them from the Main office with no problems. But I only get inbound ring tone and “dead air”. So I am looking at a Codex issue ? But if my CUE is working this should tell me that I am able to transcode G711 into G729.
>  
> Any help in pointing me in the right direction ?
>  
>  
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091124/cf492a82/attachment.html>