[cisco-voip] CCM 4.1 - Hardware Conference Bridge

[Frank Wakelin]

Hi all,
 
We're migrating off of our 6500-based 6608s and migrating to a 3845.  The
6608 was using 3x ports for T1 trunks to the telco and 2x ports as hardware
conference bridge.  The 3845s have the following inventory:

*	2x "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1
*	2x "PVDM2-64 - PVDMII DSP SIMM with four DSPs

So my question - are any of the DSP resources on this router available for
use as a replacement conference bridge?  If so, can someone point me in the
right direction for configuring these?

Frank Wakelin
Senior Technical Analyst, Information Technology Services

VANCOUVER AIRPORT AUTHORITY
DIRECT: 604.303.4797 |  FAX: 604.232.6198 |  WWW.YVR.CA <http://www.yvr.ca/>



OFFICIAL AIRPORT OF THE VANCOUVER 2010 OLYMPIC AND PARALYMPIC WINTER GAMES

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091126/f3d51788/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1999 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091126/f3d51788/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 5105 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091126/f3d51788/attachment.bin>