[cisco-voip] CCM 4.1 - Hardware Conference Bridge

[Lelio Fulgenzi]

you can use the DSP calculator to tell you what you need. 

www.cisco.com/go/tools (THANKYOU WES) 

and select DSP calculator 

plug in your 2x2mft ports, 96 calls and then see how many DSPs you need for that. 

then you can just keep adding conference calls until you get to 2xPVDM64 chips. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Frank Wakelin" <Frank_Wakelin at yvr.ca> 
To: cisco-voip at puck.nether.net 
Sent: Thursday, November 26, 2009 5:23:52 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] CCM 4.1 - Hardware Conference Bridge 


Hi all, 

We're migrating off of our 6500-based 6608s and migrating to a 3845. The 6608 was using 3x ports for T1 trunks to the telco and 2x ports as hardware conference bridge. The 3845s have the following inventory: 

    • 2x "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 
    • 2x "PVDM2-64 - PVDMII DSP SIMM with four DSPs 

So my question - are any of the DSP resources on this router available for use as a replacement conference bridge? If so, can someone point me in the right direction for configuring these? 



Frank Wakelin 
Senior Technical Analyst, Information Technology Services 

VANCOUVER AIRPORT AUTHORITY 
DIRECT: 604.303.4797 | FAX: 604.232.6198 | WWW.YVR.CA 


OFFICIAL AIRPORT OF THE VANCOUVER 2010 OLYMPIC AND PARALYMPIC WINTER GAMES 

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091126/881000ad/attachment.html>