[cisco-voip] G.729 MoH CCM 7.1

[O'Brien, Neil]

I knew that would happen - as soon as I went seeking help, I found what
I needed.  In service parameters under Supported MoH codecs, I forgot to
change it to G729.  It all makes sense now, I think I'm just having a
slow day!!

 

Thanks,

 

Neil

 

 

 

From: O'Brien, Neil 
Sent: 30 November 2009 17:21
To: cisco-voip at puck.nether.net
Subject: G.729 MoH CCM 7.1

 

Hey,

 

I've set up numerous call manager clusters and this one has me
scratching my head.

 

Normally, to save on bandwidth over the WAN, I put the MoH server into
its own device pool/region and set it to use G.729 with all other
regions.  It's always worked up until now.

 

I have a CCM 7.1 cluster and it just refuses to play MoH over G.729.  If
I change the region to G.711 it works fine, but if I set it to G.729 all
I get are the 3 beeps.

 

I've spent hours looking at this convincing myself that I've missed
something silly but I've been over and over it and can't seemt o figure
it out.

 

Hoping someone might be able to shed some light on it,

 

Thanks,


Neil

 

Regards,

 

Neil O'Brien

Network Engineer

 

Datapac Ltd

Phone: +353 1 426 3500

Fax:    +353 1 426 3501

Email:  nobrien at datapac.com

Web:   www.datapac.com

 

 

 

Datapac is the leading Irish business technologies provider

IT Maintenance & Managed Services | Virtualisation & Storage Solutions |
Microsoft Infrastructure Solutions 

Voice & Data Networks | Unified Communications | Microsoft Dynamics Nav
ERP | EPOS Retail Solutions | IT Consumables

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091130/d523d9be/attachment.html>