[cisco-voip] Wacky telco issues... cannot call the UK

[Jonathan Charles]

Nope, it is an NI2... super duper confirmed...


J

On Mon, Nov 30, 2009 at 5:38 PM, Mike Lydick <mike.lydick at gmail.com> wrote:
> I was thinking the same. Also does the provider require Software Select
> features? Mega-com...
>
>
> Best Regards,
>
> Mike Lydick
>
>
>
>
> On Mon, Nov 30, 2009 at 6:30 PM, Scott Voll <svoll.voip at gmail.com> wrote:
>>
>> Can you leave it international and strip the 011?
>>
>>
>> On Mon, Nov 30, 2009 at 3:16 PM, Jonathan Charles <jonvoip at gmail.com>
>> wrote:
>>>
>>> OK, here's one that is stumping me...
>>>
>>> CUCM 7.0, H.323 Gateways with 3 PRIs.
>>>
>>> We can call all over Europe, Oceania, Asia... but not the UK.
>>>
>>> Calls go out:
>>>
>>> ch = primary-ni interface = User
>>> Nov 30 17:07:21.704 CST: ISDN Se0/1/0:23 Q931: TX -> SETUP pd = 8
>>> callref = 0x147B
>>>        Bearer Capability i = 0x8090A2
>>>                Standard = CCITT
>>>                Transfer Capability = Speech
>>>                Transfer Mode = Circuit
>>>                Transfer Rate = 64 kbit/s
>>>        Channel ID i = 0xA98397
>>>                Exclusive, Channel 23
>>>        Calling Party Number i = 0x2181, '8475552096'
>>>                Plan:ISDN, Type:National
>>>        Called Party Number i = 0x91, '011441787883195'
>>>                Plan:ISDN, Type:International
>>> Nov 30 17:07:21.744 CST: ISDN Se0/1/0:23 Q931: RX <- CALL_PROC pd = 8
>>> callref = 0x947B
>>>        Channel ID i = 0xA98397
>>>                Exclusive, Channel 23
>>> MC003137#
>>> Nov 30 17:07:21.744 CST: ISDN Se0/1/0:23 Q931: RX <- PROGRESS pd = 8
>>> callref = 0x947B
>>>        Cause i = 0x829F - Normal, unspecified
>>>
>>>
>>> And fail.
>>>
>>> On the Route Pattern, we are forcing plan and type to unknown/unknown;
>>> telco came in and made these calls successfully from the smartjacks; I
>>> have a dial peer invoking a translation profile:
>>>
>>>
>>> !
>>> voice translation-rule 2
>>>  rule 1 // // type international unknown plan isdn unknown
>>> !
>>> !voice translation-profile UK
>>>  translate called 2
>>> !
>>>
>>>
>>> !
>>> dial-peer voice 60 pots
>>>  translation-profile outgoing UK
>>>  destination-pattern 01144T
>>>  port 0/0/0:23
>>>  prefix 01144
>>> !
>>>
>>> There are no transformation patterns on the system, there are no
>>> translation patterns on the system; every other international call
>>> succeeds without any issue (plan and type are unknown)...
>>>
>>>
>>> Any ideas? I seriously have no idea where this plan and type are
>>> coming from, or how to get rid of them...
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>