[cisco-voip] Wacky telco issues... cannot call the UK

[Mike Lydick]

I was thinking the same. Also does the provider require Software Select
features? Mega-com...


Best Regards,

Mike Lydick




On Mon, Nov 30, 2009 at 6:30 PM, Scott Voll <svoll.voip at gmail.com> wrote:

> Can you leave it international and strip the 011?
>
>
>
> On Mon, Nov 30, 2009 at 3:16 PM, Jonathan Charles <jonvoip at gmail.com>wrote:
>
>> OK, here's one that is stumping me...
>>
>> CUCM 7.0, H.323 Gateways with 3 PRIs.
>>
>> We can call all over Europe, Oceania, Asia... but not the UK.
>>
>> Calls go out:
>>
>> ch = primary-ni interface = User
>> Nov 30 17:07:21.704 CST: ISDN Se0/1/0:23 Q931: TX -> SETUP pd = 8
>> callref = 0x147B
>>        Bearer Capability i = 0x8090A2
>>                Standard = CCITT
>>                Transfer Capability = Speech
>>                Transfer Mode = Circuit
>>                Transfer Rate = 64 kbit/s
>>        Channel ID i = 0xA98397
>>                Exclusive, Channel 23
>>        Calling Party Number i = 0x2181, '8475552096'
>>                Plan:ISDN, Type:National
>>        Called Party Number i = 0x91, '011441787883195'
>>                Plan:ISDN, Type:International
>> Nov 30 17:07:21.744 CST: ISDN Se0/1/0:23 Q931: RX <- CALL_PROC pd = 8
>> callref = 0x947B
>>        Channel ID i = 0xA98397
>>                Exclusive, Channel 23
>> MC003137#
>> Nov 30 17:07:21.744 CST: ISDN Se0/1/0:23 Q931: RX <- PROGRESS pd = 8
>> callref = 0x947B
>>        Cause i = 0x829F - Normal, unspecified
>>
>>
>> And fail.
>>
>> On the Route Pattern, we are forcing plan and type to unknown/unknown;
>> telco came in and made these calls successfully from the smartjacks; I
>> have a dial peer invoking a translation profile:
>>
>>
>> !
>> voice translation-rule 2
>>  rule 1 // // type international unknown plan isdn unknown
>> !
>> !voice translation-profile UK
>>  translate called 2
>> !
>>
>>
>> !
>> dial-peer voice 60 pots
>>  translation-profile outgoing UK
>>  destination-pattern 01144T
>>  port 0/0/0:23
>>  prefix 01144
>> !
>>
>> There are no transformation patterns on the system, there are no
>> translation patterns on the system; every other international call
>> succeeds without any issue (plan and type are unknown)...
>>
>>
>> Any ideas? I seriously have no idea where this plan and type are
>> coming from, or how to get rid of them...
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091130/e3580c70/attachment.html>