[cisco-voip] CallManager DMA doesn't keep ICD Extension

[Chris Ward (chrward)]

CSCsy07560

Resolved in DMA 7.1.2 and 6.1.4. Which means you would also need to
upgrade to 7.1.2 or 6.1.4.

-Chris

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Thursday, October 01, 2009 9:35 AM
To: Jason Aarons (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CallManager DMA doesn't keep ICD Extension

I noticed this a long time ago.. figured it was just a normal part of
having to rebuild IPCC from scratch....

J

On Thu, Oct 1, 2009 at 8:24 AM, Jason Aarons (US)
<jason.aarons at us.didata.com> wrote:
> Anyone found a workaround for this, can the ICD Extension settings be
BATed
> back in after upgrade to 6.1(3) ?
>
> I also recall the DMA upgrade won't set IAQInstalledFlag to True on
> CallManager, so in the long run re-installing IP IPV/UCCX was the only
good
> fix.
>
>
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method
=fetchBugDetails&bugId=CSCsy07560
>
> DMA does not migrate ICD Extension Symptom:
>
> ICD Extension not exported in DMA Process.
>
> Conditions:
>
> This occurs for all DMA Exports including DMA 6.1(3) and 7.0.
>
> Workaround:
>
> Manually recreate the ICD Extension after install.
>
> Fixed-In
> 7.1(1.17)
> 7.1(1.18)
> 7.1(1.19)
> 7.1(2.1)
> 7.1(2.2)
> 7.1(2.3)
> 7.1(2.4)
> 7.1(2.5)
> 7.1(2.6)
> 7.1(2.7)
> 7.1(2.31)
> 7.1(2.32)
> 7.1(1.39000.137)
> 7.1(1.39000.138)
> 6.1(3.9901.121)
> 7.1(1.21)
> 6.1(3.7)
> 7.1(1.22)
> 6.1(3.8)
> 7.1(1.23)
> 6.1(3.9)
> 6.1(3.10)
> 6.1(3.11)
> 6.1(3.12)
> 6.1(3.13)
> 6.1(3.9999.1)
> 6.1(3.14)
> 6.1(3.15)
> 6.1(3.16)
> 7.1(2.10000.16)
> 6.1(4.1000.10)
> 7.1(2.39000.158)
> 6.1(4.39000.90)
> 6.1(4.14)
> 6.1(4.15)
> 6.1(4.16)
> 6.1(3.601)
> 6.1(4.17)
> 6.1(4.2000.2)
> 6.1(4.18)
> 6.1(3.602)
> 6.1(4.19)
>
> ONLY
>
>> Anyone noticed that the DMA for 7.0(1) isn't keeping UCCX information
>> about users. Customer is using DCD.
>
> CSCsy07560
>
>
http://www.gossamer-threads.com/lists/cisco/voip/104284?search_string=dm
a%20uccx;#104284
>
> Status Report to PM about why it took so long;
>
> 7. Created all call center agents (resources) in rmcm subsystem. (This
> took longer than expected because it appears that the DMA did not
> maintain certain user directory settings from the old UCM4.x....such
as
> which phone exten. is primary and whcih UCCX extension. I had to
> manually set all of these in UCM7 for all 280 or so agents.
> Investigated using the BAT tool, but I saw that was going to waste too
> much time and may not have been doable in the end)
>
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
designated
> addressee(s) named above only. If you are not the intended addressee,
you
> are hereby notified that you have received this communication in error
and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this
communication in
> error, please notify us immediately by replying to this message and
deleting
> it from your computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip