[cisco-voip] routers communicating with sip protocol

[Cristobal Priego]

they should communicate through dial-peers

issue a show run and look something like this

dial-peer voice XX voip

destination-pattern <whatever>
* session protocol sipv2*
 session target ipv4:<Ip address of the other gateway>:<5060(optional)>
 dtmf-relay rtp-nte
 no vad



2009/10/5 anand <anand.eee at gmail.com>

> Hi
> I have two cisco routers connected to each other through a switch.They are
> communicating each other through h323 protocol(found using wireshark).How
> can i make them to communicate using SIP protocol.
>
>
> thanks,
> anand.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091005/d736f30a/attachment.html>