[cisco-voip] routers communicating with sip protocol

[anand]

Hi Cristobal Priego,

Thanks for the help.

On Mon, Oct 5, 2009 at 11:41 AM, Cristobal Priego <cristobalpriego at gmail.com
> wrote:

> they should communicate through dial-peers
>
> issue a show run and look something like this
>
> dial-peer voice XX voip
>
> destination-pattern <whatever>
> * session protocol sipv2*
>  session target ipv4:<Ip address of the other gateway>:<5060(optional)>
>  dtmf-relay rtp-nte
>  no vad
>
>
>
> 2009/10/5 anand <anand.eee at gmail.com>
>
>> Hi
>> I have two cisco routers connected to each other through a switch.They are
>> communicating each other through h323 protocol(found using wireshark).How
>> can i make them to communicate using SIP protocol.
>>
>>
>> thanks,
>> anand.
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091005/6412be1a/attachment.html>