[cisco-voip] HP Server Solutions page on Cisco 7800 MCS

[Lelio Fulgenzi]

I asked this a day or two ago...Wes confirmed that only the single 2.53Ghz CPU is required for CallManager as the "7845" equiv. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Subhrojyoti Banerjee" <subhrojyoti at hotmail.com> 
To: cisco-voip at puck.nether.net 
Sent: Tuesday, October 6, 2009 1:41:41 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] HP Server Solutions page on Cisco 7800 MCS 






Hi All, 




As you can see from below screen shot, the G6 is mentioned; and in the table that follows, we have specific mention of the G6 being able to be used to load CUCM. 




http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_overview09186a0080107d79.html 

































But on the reference page for CUCM, we see the AC691A model (5540 - 2.53GHz) referred to 










Whereas the box is checked for CCM 4.3(2) and CUCM 7.1(3). I don't know why we don't see a dual Nehalem HP box on this matrix yet, but neither do we see an dual Nehalem IBM box. Perhaps still being tested. 

Am I reading this correctly? 

Has anyone tried to install CUCM 7.1(3) on a DL380G6 single E5540 (AC691A)? 

Thanks and regards, 
Subhrojyoti 


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091006/1b0639b1/attachment.html>