[cisco-voip] SIP transcoder question

[Aman Chugh]

Your transcoding profile on the router might not have the codec which your
sip client is using. Check the codec used by sip client and see if it is
supported and included on IOS transcoder profile.

Aman

On Sat, Oct 10, 2009 at 1:53 AM, Leslie Meade <lmeade at signal.ca> wrote:

>  I have a site that wants to is a SIP client on their iPhone’s, I have
> them calling each other with no issues, along with calling out to the pstn
> fine.
>
> Inbound from the WAN are working fine, however the sip client does not seem
> to activate the transcoder when dialing across the wan.
>
> What could be the issue ?
>
>
>
> How can I see if the sip client is trying to use the transcoder ?
>
>
>
> Sh dspfarm all is telling me that the transcoder is up and I see it
> transcoding for inbound calls but not for outbound
>
>
>
>
>
> Leslie
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091010/27e5d06e/attachment.html>