[cisco-voip] See what hunt pilot a call is coming from?

[Carter, Bill]

I just ran into this...Create a new partition. Add the new partition to
the calling search spaces above the regular DN partition. Create a CTI
Port, the DN the number is the same as the Hunt Pilot and is placed in
the new partition. The calling search space is one that does not
included the new partition. 

The Hunt Pilot is placed in the regular DN partition. In the Line
configuration you can also add a name such as Hunt Pilot 1. CFwAll the
line to the hunt pilot. Users will see "Call Forwarded from "Hunt Pilot
1"

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
maciej at consign.se
Sent: Monday, October 12, 2009 6:16 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] See what hunt pilot a call is comming from?

Hi

How do I setup a hunt pilot in UCM 7.1 so the members can see the called

number instead of the calling number on their phones?

Br.
Maciej

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip